Rusting stand

[Joe Damone]

Hi All,
I know this is not an advanced topic but I wanted to get opionions from guys and girls that have been around awaile. Anyone ever hear of a tank stand failing from rust?

Thanks

Joe Damone

 

[BurntOutReefer]

yes...eventually it will rust enough where the legs/or side/bottom supports will not be able to support it...depends on where the rust is though.....

 

[Joe Damone]

Wow!! its rusting all over . House in general is moist but especialy the fish room.The stand is about 3 years old and cant say how long I have noticed the rust.Looks like just surface rust at this point but need to figure out a course of action.I would say where the legs meet the floor is the most rusty part. What would you do?



Thanks

Joe

 

[BurntOutReefer]

the tanks 125g?....sand the rust off to see how deep....if just surface...then sand it ll down and use Rust-O-Lium paint....(howvere, thats a temp fix).....
I would look at making a DIY retrofit wood stand......you dont want to have to move the tank unless you have to.....
you any good at woodworking...

 

[Joe Damone]

yes its a 125 . Woodworking is not my strong suite. But have some friends that are good and I may be able to get some help from. Is rustolium ok to use around a reef tank?

You may be able to get an idea from my webcam.


http://joeyfishes.viewnetcam.com:5000 and click single you can increase the size of the view


thanks

jd

 

[Joe Damone]

PS have you had one fail?

jd

 

[Marsfrogie]

Look up POR15. It won't rust anymore after that. That is, or course, if you follow the direction to the T.

 

[Joe Damone]

thanks have you used this around a reef tank?

jd

 

[Marsfrogie]

No, I have not used it in a reef tank, but if you are just putting it on the stand it should not matter. It is a moisture cured paint so it is only going to get stronger with the water contact. The only thing that is absolutely critical is to have the piece you are painting 100% dry. You have to use a blowdryer to do this. Even if it looks dry it is not. You really doin't even need most of their preparation products. If you are applying directly to steel it does not need much prep work. Just hit it with a wire brush. It does however HAVE to be in direct contact with the steel to work correctly.

 

[Joshua1023]

Just a though. I've done a fair amount of body work to cars and such in the past. I'm by no means a pro, but I remember using a product in the past called a rust converter. This product can be found in any auto parts store and claims to convert rust to a black primer that will not rust again. Sand, prime, paint and your done. I wouldn't use sprays around a running tank. Try to find some metal paint that you can brush on. I know I've seen it. hth

happy reefing,

Josh

 

[Marsfrogie]

That rust converter is oftentimes a phosphoric acid base. It works for a couple of years but you will just be dealing with the problem again eventually. That POR15 is a 50+ year paint.

 

[Joe Damone]

Thanks guys not sure what product im gonna use yet but thanks for the info. I am hopeing to find someone that has used one of these on an up and running reef with no ill effects before I jump in

Thanks

Joe

 

[Joe Damone]

PS I have talked to guys that own aquarium stores for 20 years and guys that work at Public aquariums and no one has heard of a metal tank failing because of rust. But I dont want to be the FIRST

Thanks

jd