Fanof49ASU
Premium Member
Since the search feature will not allow a 2 digit word, I'm having trouble finding any results.
I realize that 80 is much heavier, but, is it worth it?
I realize that 80 is much heavier, but, is it worth it?
Schedule 40 vs 80 ?
- Thread starter Fanof49ASU
- Start date
crumbletop
New member
It depends on what you want to use it for. I think sched 40 is fine for all the pipes, etc. Sched 80 bulkheads are much better than their sched 40 counterparts, with thicker gaskets and sturdier fittings. If you are looking at bulkheads, keep in mind that the standard drilling in AGA tanks doesn't allow room for a sched 80 (the holes aren't big enough) so make sure the holes you have will accommodate the slightly larger diameter of the sched 80 bulkheads.
Fanof49ASU
Premium Member
I've already drilled, so it's too late. I was just curious if the 80 is that much better.
Thanks.
Thanks.
DMBillies
Active member
Bigger is always better, isn't it? 
I'd say it is similar to people using 2x10's for tank stands... using heavier duty stuff might make you sleep a little better at night, but for most applications they cannot be considered "necessary." Or at least not necessary enough to bother drilling the tank out farther.
...but mine are schedule 80
I'd say it is similar to people using 2x10's for tank stands... using heavier duty stuff might make you sleep a little better at night, but for most applications they cannot be considered "necessary." Or at least not necessary enough to bother drilling the tank out farther.
...but mine are schedule 80
waynesworld
Premium Member
Also when you look at bigger you also have to look at smaller inside dimension now I do not know for a fact but in the large Tank threads there is some talk about using the real light stuff to lessen the resistance. Here is a link that compares the two.
http://www.harvel.com/pipepvc-sch40-80-dim.asp
http://www.harvel.com/pipepvc-sch40-80-dim.asp
