Simu-Spot LED set-up Help!

[xgames]

I just purchased a Simu-Spot full effect LED and cant get it to work. It just stays lit with a row of blue and a row of white leds.

I cant figure out how to program it.

Any help would be great.

Thanks

 

[AQD_ottawa]

Hi

Here to help

Plug the cable into a non assigned L port.

For this example we shall use L1L2

Now go to 1-10V interface in the pc softare and do the following

assign L1 to illumination 1
assign L2 to Illumination 2

Now illumination 1 should control the red and illumination 2 the blue, if it is the other way round you will soon find out and just swap the times you set accordingly.

Now press load and save

Go to Illumination 1 and select the tab dimmable.

Now assign you dimming times.

press new a pop up box will appear

select the start time of the sunset/rise

select how long you wish the dimming cycle to take for instance 60 minutes.

Select what intensity from 0 to 100

press ok

Now press new again and select you down period exactly as you did the above.

if any times are pre set you can always delete these before starting.

Now go to illumination 2 and do the same for your blue/white

the white is not independantly controllable.

 

[xgames]

Great,

Now how do you set a Storm. I can't seem to get it going. I can't even run a storm demo.

Thanks

 

[AQD_ottawa]

go to

Illumination
then
Thunderstorm

Then set your start stop times as you desire. and the duration of the storm.