Good Afternoon, i'm considering upgrading/switching skimmers. I have an Aquamaxx Cones-S CS-2 currently on a 94g cube, and have a very tight sump, and was trying to figure out what options are out there and if i can find something better.
The area in the sump for the skimmer is 10" wide by 17.25" long. The absolute maximum on height is 24.5" The baffles are 9.5" tall but usually have close to 10" of water level. So the skimmer can be wider than 10" if the part that is wider is above the baffles.
Also height wise, there has to be enough clearance to remove the collection cup on top.
The RLSS-R8-I with the DC6000 pump appears to fit in its place, so would the AquaC EV-180.
I'm hoping for something that makes close to zero noise, fits in the place.
I'm running a bio-pellet reactor and it would be an extra plus if the skimmer had some kind of threaded inlet that would allow me to hook T on the inlet of the skimmer to connect the output of the reactor. (usually a feature on external models)
I also have an external collection canister with a hose, that I would like to hookup to the skimmer.
I would be super excited if someone could recommend one that was recirculating or not dependent on the water level that fit all this criteria... (yeh a huge wish list)
Would the RLSS-R8-I be an upgrade or equivalent? The Ev-180 i know is older but is it obsolete/worse or better than what I have? Also what is noise level?
Anyways i would love opinions/suggestions
Thank You
-Nathan
The area in the sump for the skimmer is 10" wide by 17.25" long. The absolute maximum on height is 24.5" The baffles are 9.5" tall but usually have close to 10" of water level. So the skimmer can be wider than 10" if the part that is wider is above the baffles.
Also height wise, there has to be enough clearance to remove the collection cup on top.
The RLSS-R8-I with the DC6000 pump appears to fit in its place, so would the AquaC EV-180.
I'm hoping for something that makes close to zero noise, fits in the place.
I'm running a bio-pellet reactor and it would be an extra plus if the skimmer had some kind of threaded inlet that would allow me to hook T on the inlet of the skimmer to connect the output of the reactor. (usually a feature on external models)
I also have an external collection canister with a hose, that I would like to hookup to the skimmer.
I would be super excited if someone could recommend one that was recirculating or not dependent on the water level that fit all this criteria... (yeh a huge wish list)
Would the RLSS-R8-I be an upgrade or equivalent? The Ev-180 i know is older but is it obsolete/worse or better than what I have? Also what is noise level?
Anyways i would love opinions/suggestions
Thank You
-Nathan