microbubbles
New member
moving and i need to make this thing disappear. NO LIVESTOCK. needs a little work, but a few hundred invested and i'm sure you can get this thing to look better than i did in its heyday. it's been sitting dry in my garage for a little bit now. i'm mostly interested in someone who will take the entire lot.
these pics were just prior to completion:
ALL plumbing (with the exception of the bulkheads) is schedule 80- and all fittings are Spears or Hayward (wye check valve is georg fischer); and everything is connected via true union true union ball valves, so it breaks down conveniently and minimal headaches/water leak during any servicing, or in case you ever have to move.
i know i have over $800+ invested in the plumbing, alone.
*eurobraced 90 visio (5 yrs old) - 2 x 1" holes, 4 x 1/2" holes drilled on back, 1.5" drain in overflow. the flow running through the tank can be controlled in a variety of ways- independent ball valves to increase or decrease flow in 3 different zones in within the tank. One caveat- one panel (out of 5 total) of the eurobracing came off when i was servicing the hood and shattered. any glass shop should be able to replace this for less than $50
*wood furniture grade stand - 49" x 21" x 40"+ 2 flush mounted dj power strips, shelves for ballasts/dosing pumps, ample storage to hide wires and prevent splash; pvc manifold feeding chiller, (2) phosban reactors, tee'd and capped for future expansion
*ATB MEDIUM CONE (not the new school mass produced versions) skimmer with Airstar pump (needs service, quoted at $140 from victor).
*Schuran Jetstream- brand new, completely unused... lol just for show apparently (i opted for dosing)
*2 x Cole Parmer Masterflex microprocessor doing pump w/ easy load head- both were purchased brand new; one is unworking, the other has been used less than 3 months. keep the broken one for parts. these are profession hospital dosing pumps retail for over $600 each. http://www.abbott-ir.com/upload/images/IMG_00813.jpg (the model i have is indentical to this one, but fitted with Masterflex Easyload pump head attached to the side unit w/ an internal motor; i believe the pictured model is the controller only.)
*2 x Lumenbrite DE reflectors- very good condition; no corrosion whatsoever on the reflector itself, only visible flaw is the rust on the screws (can't do anything about that). 1 BRAND NEW lumenbrite reflector
*Bluewave VII dual 250w SE ballast, with individual power switches. 3 yrs old, but consistent and trusty
*Medusa dual stage temp controller
*backup ranco controller
*Tunze 6200 with single-controller
*Panworld 50-pxx pump
*PFO 2 x 48" VHO setup (ballast, endcaps, 2 bulbs with less than 2 months of use)
*Euro-fil sump (drilled to accomodate silicon hose that connects skimmer:airstar)
FINAL PRICE: $1000 cash money! PM is best.
BOX of the following goods:
if you take the tank in its entirity, you can have all of this crap for free as a bonus. i don't even want to list it. there is a ton of great, usable maintenance stuff here- medicines, treatments, food, additives, filter material, test kits, refractometer, fishtraps, fragging supplies, probes, etc etc.
____________________________
also, i have some free dry rock. fiji, i believe. maybe about 30-40 lbs
these pics were just prior to completion:
ALL plumbing (with the exception of the bulkheads) is schedule 80- and all fittings are Spears or Hayward (wye check valve is georg fischer); and everything is connected via true union true union ball valves, so it breaks down conveniently and minimal headaches/water leak during any servicing, or in case you ever have to move.
i know i have over $800+ invested in the plumbing, alone.
*eurobraced 90 visio (5 yrs old) - 2 x 1" holes, 4 x 1/2" holes drilled on back, 1.5" drain in overflow. the flow running through the tank can be controlled in a variety of ways- independent ball valves to increase or decrease flow in 3 different zones in within the tank. One caveat- one panel (out of 5 total) of the eurobracing came off when i was servicing the hood and shattered. any glass shop should be able to replace this for less than $50
*wood furniture grade stand - 49" x 21" x 40"+ 2 flush mounted dj power strips, shelves for ballasts/dosing pumps, ample storage to hide wires and prevent splash; pvc manifold feeding chiller, (2) phosban reactors, tee'd and capped for future expansion
*ATB MEDIUM CONE (not the new school mass produced versions) skimmer with Airstar pump (needs service, quoted at $140 from victor).
*Schuran Jetstream- brand new, completely unused... lol just for show apparently (i opted for dosing)
*2 x Cole Parmer Masterflex microprocessor doing pump w/ easy load head- both were purchased brand new; one is unworking, the other has been used less than 3 months. keep the broken one for parts. these are profession hospital dosing pumps retail for over $600 each. http://www.abbott-ir.com/upload/images/IMG_00813.jpg (the model i have is indentical to this one, but fitted with Masterflex Easyload pump head attached to the side unit w/ an internal motor; i believe the pictured model is the controller only.)
*2 x Lumenbrite DE reflectors- very good condition; no corrosion whatsoever on the reflector itself, only visible flaw is the rust on the screws (can't do anything about that). 1 BRAND NEW lumenbrite reflector
*Bluewave VII dual 250w SE ballast, with individual power switches. 3 yrs old, but consistent and trusty
*Medusa dual stage temp controller
*backup ranco controller
*Tunze 6200 with single-controller
*Panworld 50-pxx pump
*PFO 2 x 48" VHO setup (ballast, endcaps, 2 bulbs with less than 2 months of use)
*Euro-fil sump (drilled to accomodate silicon hose that connects skimmer:airstar)
FINAL PRICE: $1000 cash money! PM is best.
BOX of the following goods:
if you take the tank in its entirity, you can have all of this crap for free as a bonus. i don't even want to list it. there is a ton of great, usable maintenance stuff here- medicines, treatments, food, additives, filter material, test kits, refractometer, fishtraps, fragging supplies, probes, etc etc.
____________________________
also, i have some free dry rock. fiji, i believe. maybe about 30-40 lbs
Last edited by a moderator:
