Stand bracing

[mav3rick478]

So I have a standard LFS 75 gallon stand, looks like 1x4's. Trying to get my Triton 34 sump into it, hole at the top is 1/4" too narrow and there is a center brace in the back (see pics below). Could I get away with removing that brace and leaving the front one or should I remove that brace, get my sump in there and put the brace back?

Sent from my Pixel XL using Tapatalk

 

[mcgyvr]

Putting it back after installation is how you should proceed

 

[mav3rick478]

Putting it back after installation is how you should proceed

Thanks

Sent from my Pixel XL using Tapatalk

 

[billdogg]

^^^What mcgyvr said^^^

Those stands are built as poorly as they can get away with. If they felt they needed that brace there, they needed that brace there.

 

[mfinn]

I have done exactly what has been already suggested several times in the past.
Put the brace back in with screws so it's easier to remove for next time.

 

[bzbatl]

I just disassembled one that came with my 90 to throw in the garbage. It was held together with staples and no glue. I was shocked.

If you’re feeling DIY, I’d shave off that 1/4” so you can get it in, and put the brace back in with screws and some good quality construction glue, such as PL Premium.