Travis
10 and over club
I need some advice on how to lower my Mg level. First, let me explain how it got to where it is. During the 17 months of this tanks life, it has almost always ran at around 1250 Mg. A few months ago I decided to try Seachem salt and it tested in the low 1100's for Mg. This slowly brought my tank Mg level down into the low 1100's. In larger tanks it is very expensive to raise Mg levels with products from our retailers so I decided to try a more "economical" way. I got a bag of Dead Sea Ice melt on a group order from another club. I followed the directions posted by members that have used this as well as Dr. Randy Holmes-Farley. The directions were to mix 9 cups of the ice melt with 1 cup of Epson salts in 1 gallon of DI water and dose that.
1-20-06, Mg = 1120, 2 cups of supplement added
1-21-06, Mg = 1190, 2 cups of supplement added
1-22-06, Mg = 1250, 2 cups of supplement added
1-24-06, Mg = 1265, 2 cups of supplement added
1-25-06, Mg = 1310, 2 cups of supplement added
1-27-06, Mg = 1370, no more supplement added
1-28-06, Mg = 1560, 90 gallon water change performed (80% Seachem, 20% Oceanic)
1-29-06, Mg = 1560
2-2-06, Mg = 1560, 90 gallon water change performed (100% Oceanic)
2-3-06, Mg = 1560
All tests were performed with my Salifert test kit. I checked my Salifert Mg test kit against a friend's and they both read the same. I checked it against my Seachem test kit's reference solution and it tested 130 higher than the reference solution. Seachem claims that their reference solution is verified by the University of Georgia's chemistry lab.
Do I have a faulty test kit or did the DIY Mg supplement that I used really mess up my water chemistry? Any suggestions for bringing it down? I'm going to start running my CO2 to the Ca reactor on a timer to slowly bring down Ca and Alk. We will see if the Mg also falls. I have 100 gallons of water change water made up but it is all Oceanic, which already has elevated Mg levels. Should I invest in some salt that has low Mg levels and do a couple WC's to see if it helps bring it down? My main concern is that:
1)The Mg level continued to rise days after I stopped adding the supplement and then peaked at 1560.
2)I have now performed 2 90 gallon water changes. Both with water that was far lower than 1560 Mg and my tank is still testing at 1560.
1-20-06, Mg = 1120, 2 cups of supplement added
1-21-06, Mg = 1190, 2 cups of supplement added
1-22-06, Mg = 1250, 2 cups of supplement added
1-24-06, Mg = 1265, 2 cups of supplement added
1-25-06, Mg = 1310, 2 cups of supplement added
1-27-06, Mg = 1370, no more supplement added
1-28-06, Mg = 1560, 90 gallon water change performed (80% Seachem, 20% Oceanic)
1-29-06, Mg = 1560
2-2-06, Mg = 1560, 90 gallon water change performed (100% Oceanic)
2-3-06, Mg = 1560
All tests were performed with my Salifert test kit. I checked my Salifert Mg test kit against a friend's and they both read the same. I checked it against my Seachem test kit's reference solution and it tested 130 higher than the reference solution. Seachem claims that their reference solution is verified by the University of Georgia's chemistry lab.
Do I have a faulty test kit or did the DIY Mg supplement that I used really mess up my water chemistry? Any suggestions for bringing it down? I'm going to start running my CO2 to the Ca reactor on a timer to slowly bring down Ca and Alk. We will see if the Mg also falls. I have 100 gallons of water change water made up but it is all Oceanic, which already has elevated Mg levels. Should I invest in some salt that has low Mg levels and do a couple WC's to see if it helps bring it down? My main concern is that:
1)The Mg level continued to rise days after I stopped adding the supplement and then peaked at 1560.
2)I have now performed 2 90 gallon water changes. Both with water that was far lower than 1560 Mg and my tank is still testing at 1560.