DMBillies
Active member
I was planning on selling this stuff before we got the news that we are going to have to move, but now it is confirmed and I would like to sell off this equipment that we really don't need anymore. As soon as I can get decent shipping estimates, I'll be listing these in the main selling forum, so speak up if you're interested in anything. Here goes...
Super Skimmer 65 - asking $40
I don't have the bubble trap (it didn't work anyway) and I had to splice the cord because the previous owner got some SW on it and frankly it made me a little nervous to plug in the way it was. It has some scratches on the outside, but it still works as good as it ever has.
Euro Reef ES-8-1 w/ sedra 5000 pump - asking $140
Skimmer has gate valve mod. I love this skimmer and would recommend it to anyone, I just don't have a tank it will work with and don't foresee having one any time soon. It does have a crack near where the outlet of the skimmer goes through the body, but I fixed it with weld-on and it shouldn't cause any problems when it comes to the skimmer functioning (pic below)
ASM G3 w/ Sedra 5000 - $175
Skimmer has mesh mod (makes a huge difference for bubbles output) and a recirculation mod. The recirc mod puts two extra holes in the skimmer body that obviously cannot be undone. However, it can easily be converted back to a non-recirc skimmer by capping off the holes and putting the pump in its original configuration. Needs a feed pump or gravity feed if you plan to use it as a recirc.
Sedra 5000 pump (and DIY Skimmer) - $50
I built this skimmer only about a month before I down the tank it was on. It works fine, but obviously isn't as pretty as a retail skimmer. The pump is only a month old and is worth $70 new w/o shipping, so if you take the whole thing off of my hands I won't have to throw my own hard work in the trash and you'll get a pump for less than retail.
VHO Endcaps and Ballast - $15
I cleaned these end caps and ballast out of an old set-up I got. It turned out I didn't need them. Only one side of the ballast works, so I'll include it free to whoever wants to buy the endcaps (as back-up if you need it). If you can fix it, more power to ya... I haven't really looked at it much. The endcaps have quick disconnects for the ballast attached to them (see below) but they can easily be cut off.
Coralife PC Light (2x18W) - $25
Small power compact light. Both bulbs are less than 2 months old. Includes legs.
Super Skimmer 65 - asking $40
I don't have the bubble trap (it didn't work anyway) and I had to splice the cord because the previous owner got some SW on it and frankly it made me a little nervous to plug in the way it was. It has some scratches on the outside, but it still works as good as it ever has.
Euro Reef ES-8-1 w/ sedra 5000 pump - asking $140
Skimmer has gate valve mod. I love this skimmer and would recommend it to anyone, I just don't have a tank it will work with and don't foresee having one any time soon. It does have a crack near where the outlet of the skimmer goes through the body, but I fixed it with weld-on and it shouldn't cause any problems when it comes to the skimmer functioning (pic below)
ASM G3 w/ Sedra 5000 - $175
Skimmer has mesh mod (makes a huge difference for bubbles output) and a recirculation mod. The recirc mod puts two extra holes in the skimmer body that obviously cannot be undone. However, it can easily be converted back to a non-recirc skimmer by capping off the holes and putting the pump in its original configuration. Needs a feed pump or gravity feed if you plan to use it as a recirc.
Sedra 5000 pump (and DIY Skimmer) - $50
I built this skimmer only about a month before I down the tank it was on. It works fine, but obviously isn't as pretty as a retail skimmer. The pump is only a month old and is worth $70 new w/o shipping, so if you take the whole thing off of my hands I won't have to throw my own hard work in the trash and you'll get a pump for less than retail.
VHO Endcaps and Ballast - $15
I cleaned these end caps and ballast out of an old set-up I got. It turned out I didn't need them. Only one side of the ballast works, so I'll include it free to whoever wants to buy the endcaps (as back-up if you need it). If you can fix it, more power to ya... I haven't really looked at it much. The endcaps have quick disconnects for the ballast attached to them (see below) but they can easily be cut off.
Coralife PC Light (2x18W) - $25
Small power compact light. Both bulbs are less than 2 months old. Includes legs.
)
