Suggestions on Placement

Bygkid

Premium Member
I DID IT ROGER!!

First, let me say THANK YOU for all the help that you gave me with my 6045 problems. Customer service is TOP NOTCH!!


I bought the 7095 multicontroller and 2 6055 nanostream pumps to aid the water movement in my tank. My tank measures 60x29x18 and my rockwork is stacked to create as many openings caves and swim throughs as possible to allow for water and fish movement in and out of the rockwork.


PA300015.jpg



My 2 6045's are currently pointed up at the surface from both sides in order to create a crash in the center and downward push of the water at the center of the tank. The LR makes it roll an few inches left and right.
I was wondering if I could install the 6055's in their place and move the 6045's to the back. Would this be too much in this type of tank? Do I need the 6045's anymore. any ideas or help would be much appreciated.

Scott:strooper:
 
It is a nice looking tank, I would use all four pumps. I would place the 6055's lower and angled upwards and place the 6045's near the top aimed straight across. Just be sure they are accessible for service.
 
I was considering using the pulse setting. Would this be adviseable? Or should I just use Interval 1 or 2 and just adjust the intensity?

Scott:strooper:
 
Pulse occurs in all modes, I would recommend interval 2, this way you alternate between pumps and the pumps still pulse.
 
Back
Top