Sump/Refugium Build Questions

xXxSpyderxXx

xXxSpyderxXx

New member
i went to a LFS and picked up a 20g long to make into a Refugium for my 75g, and i have a 10g laying around so i thought i would put it to use also, turns out my stand is 2 small to fit the tanks lol :-P cant even fit one of them, so i figured it would give me a good reason to build one or find a nice one on CL but anyways, here is what i had in mind for the build

samplemo.jpg


im looking for suggestions, ideas, and such to make it better as this is my first time attempting to make one. i was gonna use bio balls but was told from a few reefers they raise nitrates or was it nitrites ither way i was told they wernt good (ideas?) so just looking for suggestions and stuff, both good and bad :-)
 
Your design looks good. Are you planning on inverts or a small fish in the fuge part? Your baffle design looks good, but be sure to keep them spread apart to allow you variable flow options and the baffles that are facing inside the fuge area will require some type of screen (egg crate type of material) to prevent your critters from going through the baffles. I know that much from experience. Trying to retrofit something after the fuge is operational is troublesome! From your diagram; are you going to drill the sump/fuge and then hard pipe them together? That would be a nice and clean looking job but be sure to keep cleaning the plumbing in mind. Looks good, Have fun!
 
uslanja said:
Your design looks good. Are you planning on inverts or a small fish in the fuge part? Your baffle design looks good, but be sure to keep them spread apart to allow you variable flow options and the baffles that are facing inside the fuge area will require some type of screen (egg crate type of material) to prevent your critters from going through the baffles. I know that much from experience. Trying to retrofit something after the fuge is operational is troublesome! From your diagram; are you going to drill the sump/fuge and then hard pipe them together? That would be a nice and clean looking job but be sure to keep cleaning the plumbing in mind. Looks good, Have fun!
Click to expand...

i was thinking of only keeping plants and macros in the fuge. yes i planned to drill the sump/fuge and use hard pipe. good point on keeping cleaning in mind lol
 
Instead of running the two in series, consider doing in parallel with a valve that can control how much goes into each. That way, you can run a smaller amount of (read: lower flow speed) through the refugium (from the root "refuge"). You might also want to make the smaller tank the refugium, and put the LR and skimmer via the large one.
 
jeremyjoslin said:
Instead of running the two in series, consider doing in parallel with a valve that can control how much goes into each. That way, you can run a smaller amount of (read: lower flow speed) through the refugium (from the root "refuge"). You might also want to make the smaller tank the refugium, and put the LR and skimmer via the large one.
Click to expand...

hummm good ideas, im gonna have to think about this hummmm
 
You must log in or register to reply here.

Similar threads

DjPhato
Best species for refugium
Replies
4
Views
586
Cdentata
C
BuckeyeFish
AIO 24g refugium?
Replies
1
Views
573
griss
griss
E
Looking for fake wood/resin wood post decor?
Replies
3
Views
534
ExitTrauma
E
teencie
45G Diamond Tank
Replies
5
Views
554
griss
griss
AZBigJohn
New Build... I'm back
2
Replies
25
Views
2K
Dustin07
D
Back
Top