sump/skimmer/refugium

i meant i dont want one of the huge overflow boxes sitting in my tank because it will take up all the room so i just wanted another way so it would only be a small space being taken up like melevs design for his overflow
Duds
 
<a href=showthread.php?s=&postid=7797973#post7797973 target=_blank>Originally posted</a> by dngspot
I would not say borrowed from Melev's Reef.
Click to expand...

He puts his designs up for people to use, does he not? I still give him credit for the basic design.
 
<a href=showthread.php?s=&postid=7798019#post7798019 target=_blank>Originally posted</a> by duds
alright now i know how to do all that, what tube do i use for the return? and how big of a pump should i use to get the water flowing back into the tank? any ideas on other skimmers?
Thanks
Duds
Click to expand...
I have used hoses from 3/4 to 1 1/2 this will depend on what size pump for a intake ( line from the over flow to the sump). My buddy who has a 29 G unit uses 1 inch. His pump moves 1300 gallons an hour, but you can use any thing from 250gph to 1300gph to push water back to the tank. Attach pvc to your pump and plum it to the tank as a return, I recomed the same size as the output of your pump.
 
<a href=showthread.php?s=&postid=7798045#post7798045 target=_blank>Originally posted</a> by duds
i meant i dont want one of the huge overflow boxes sitting in my tank because it will take up all the room so i just wanted another way so it would only be a small space being taken up like melevs design for his overflow
Duds
Click to expand...

Ok, check out the cpr overflows, they are a little slimmer in design.
 
<a href=showthread.php?s=&postid=7798064#post7798064 target=_blank>Originally posted</a> by ReeferMO85
He puts his designs up for people to use, does he not? I still give him credit for the basic design.
Click to expand...
I simply do not know who developed the design but from my point of view he is not the only contributor to my final results.
 
i just took a look at it on marinedepot.com and it says it skims 6 times more than units with tubes what is that suppose to mean? do i still need a skimmer?
Thanks
Duds
 
o alright, im new to this type of stuff, so what tubing do you guys use for your tanks (from the sumps to the tank)?
Thanks
Duds
 
<a href=showthread.php?s=&postid=7798084#post7798084 target=_blank>Originally posted</a> by dngspot
Mfinn are you the famous Melves Reef?
Click to expand...

:lol: :lol: :lol: :lol:

No, I just try and help when I can.
 
<a href=showthread.php?s=&postid=7798065#post7798065 target=_blank>Originally posted</a> by dngspot
I recomed the same size as the output of your pump.
Click to expand...
Why? My Mag9.5 uses 3/4" output, I convert that into a 1" and I couldn't be happier with the results. IMO the 9.5 produces to much flow for a 3/4" pipe.
 
i will probably go as small as possible for a return pump i already think i have enough flow in my tank, but what piping is the best for plumbing from the tank to the sump and the sump to the tank?
Thanks
Duds
 
If you are not comfortable using pvc, a good alternative is the reinforced braided flexable tubing sold at home depot or lowes.
I use a combination of both
 
alright i will more than likely go with the flexible tubing just in case, i am a kid and leaks are not going to be appreciated in my parents house
Duds
 
I was thinking of a asm G1X skimmer would that be overkill, the sump i am going to add is a 25 gallon aga tank?
Thanks
Duds
 
o ok then looks like the G1X is the skimmer for me, has anyone had any experience with them or other asm skimmers?
Thanks
Duds
 
You must log in or register to reply here.

Similar threads

C
Thoughts anyone?
Replies
7
Views
2K
Cool Fish
Cool Fish
S
Overskimming on New Protein Skimmer
Replies
2
Views
148
wvned
wvned
S
Novice Aquarist - Sump & Equipment Questions
Replies
9
Views
347
wvned
wvned
C
Hydros w/sump
Replies
3
Views
167
wvned
wvned
C
Looking for 40g breeder setups…
Replies
8
Views
206
griss
griss
Back
Top