test - please ignore

Status
Not open for further replies.
TOM Rapids Pro Series PS3 Complete Sump system with Skimmer

i bought one of these used and cheap just to get the overflow box. now i'm thinking i could easily attach it with minimal work to my current system.

problem is, it didn't come with a manual and i can't seem to find one online. i also don't know if all the parts are there. i was hoping i could mod it if it needs mod'ing and use it since its just sitting there. is there anybody out there with a manual or knows a place i can find it online? i would gladly send a self-addressed stamped envelope with five good ol hard cash canadian dollars for the photocopies....
 
i've just ordered my new tank which should be delivered in about a week, my question is , if anyone could help. how much live rock should i order and should i order all live rock or should i order live rock & base rock, the tank is 420 ltrs and is 800mm wide 650mm deep and 900mm high. please help
 
well guys, my nano has flat worms, and ive spotted two aptasia anemones. now i see tiny round white blobs that are growing on the glass. they are only about a 1/16th of an inch and are round, and very white. pretty sticky to the glass as well. any ideas on what it is? good or bad?
 
I just purchased two SpectraPure 90GPD membranes that I run piggy backed and am a little confused about the 180 GPD flow restrictor and how long it should be. Should I still aim for the 4:1 ratio? My PSI is around 85 and my water temp is around 75.
 
I just bought a recirculating octopus skimmer 200 and there were no instructions with it! Can anyone help me with a good site to find instructions and pictures for set up?
 
I am switching from a 100gpd to a 75 gpd RO membrane. I order the new 75 membrane and appropriate flow restrictor. I don't see anything that looks like it on the tube going in or out of the RO membrane to replace. Can anyone help me to install the new flow restrictor and remove the old one?
 
I was able to get one of these from my uncle who was taking down his tank.

I transferred him to my 120 gallon tank and put nim about 6-8 inches from the bottom in some live rock..

After doing some reading i discovered that its best to put the GCA in the sand.

what is everyone's experience. leave him as is or try and move him?
 
My devils hand recently shed mucus, no polyps are extended and it has a brownish looking algae on it in several areas. Would it be proper to dip it in reef dip? I had a similar issue with star polyps recently and the dip helped them but not sure about the leather. It also appears shiny in several spots. Whats up? Should I do something? Its the only coral that looks different since my possible soap introduction. I don't think it was soap but instead an over abundance of protein from decay macro(if you read the first post about my stupidity). Thanks
 
so i go to grab my dt's phyto tonight and its all slushy - now i love slushies but im not so sure about my clams and everyone else-- is it a total loss or is there a way to tell? it was not fozen solid but was diff a consistant slushy all around
 
I am looking online at all different sorts of things and see that some require high, medium or low light. I have a biocube with 10,000k (artificial sun) compact flourescents. - What does that constitute, high, medium or low?
 
Hey guys, I'm not sure if this is a common issue but I've got a Nova Extreme T5 light fixture and it's really frustrating trying to get the protective lens out of the fixture. It seems like the salt creep gets in the little channel that holds the lens and it gets stuck. Last time I took out the lens I had luck using a wet rag and soaking the corners. It took a little bit of elbow grease but I finally got it out. Today I tried removing it because one of the mounting legs broke so I tried to get the rest out and it's impossible.

Do you have any special tricks that you use?
 
I have an extra 10 gallon laying around and wanted to know how to breed my own mysis shrimp. Is this hard or even worth it. It seems that buying them frozen is so much easier.
 
Can anyone tell me how to set up a Tunze 6101? The bracket for the side mount isn't wide enough to hang over the edge, what am I doing wrong?
 
Status
Not open for further replies.
Back
Top