The T5 Q&a Thread

Status
Not open for further replies.
Grats on another split, and thanks so much for your help, Grimm!

My question is this:

I'm replacing all six bulbs in my Solar Flare, which I bought with used bulbs about 3 months ago. What would you recommend to supercharge the growth on my SPS? I have lots of cool frags, but nothing's ever grown very well, I think in part because of my lights. I have heard that the pink bulbs will encourage lots of growth, is that true?

Also, where's the best place to buy bulbs? I would like a reliable shipper; I'm a student on a budget, so if the bulbs get busted in shipping, it'll be a loooonng time before I can get the dough to reorder.
 
<a href=showthread.php?s=&postid=14438136#post14438136 target=_blank>Originally posted</a> by rldavisou
Grats on another split, and thanks so much for your help, Grimm!

My question is this:

I'm replacing all six bulbs in my Solar Flare, which I bought with used bulbs about 3 months ago. What would you recommend to supercharge the growth on my SPS? I have lots of cool frags, but nothing's ever grown very well, I think in part because of my lights. I have heard that the pink bulbs will encourage lots of growth, is that true?

Also, where's the best place to buy bulbs? I would like a reliable shipper; I'm a student on a budget, so if the bulbs get busted in shipping, it'll be a loooonng time before I can get the dough to reorder.
Click to expand...


Get them all from reefgeek.com. If you can get others to order with you it is free shipping.

ATI Blue Plus
KZ Fiji Purple
ATI Blue Plus
GE 6500K
ATI Blue Plus
ATI Aquablue
 
<a href=showthread.php?s=&postid=14437802#post14437802 target=_blank>Originally posted</a> by anin
So grim, i'm looking at from reefgeek
http://www.reefgeek.com/lighting/T5...inch__2x39W_SLR_T5_High-Output_Retrofit_Kit_w!_Bulbs_by_IceCap

http://www.reefgeek.com/lighting/T5..._2x39W_SLR_T5_Very_High-Output_Retrofit_Kit_w!_Bulbs_by_IceCap

you said before when i asked to get these bulbs
Front ATI Blue Plus
UVL 75/25
ATI Aquablue
ATI Blue Plus

I am guessing the 2 middle bulbs would be overdriven?
Click to expand...


Neither link works
 
Ok so I finally HAVE my ATI 36" 6 bulb Powermodule...and WOW...this is one NIIIIICE piece of hardware...worth every penny. The ATI guys know what they are doing. I ended up getting 4 Blue plus, 1 fiji purple, and 1 Aquablue.

I don't even have the tank up yet...but I did this:

Front
blue+
fiji purple
blue+
blue+
aquablue
blue+

I know it's all about my personal taste. and I like that all the blue+'s are on one plug and the other two are on the other plug...(dawn/dusk setting), but is there a better combination for that.
(read: better order) Already the fish colors pop, I can't wait to get it over the proper tank and stock it with corals. I'll post pics ASAP...but if there is a better order to place them in then I'm open to ideas...also I can't wait to give reefgeek more business and get different color bulbs and play around with it...I'll bug you guys about that later once the tank is up and running (hopefully this month)

thanks for all the help so far. This light is a beast, a sexy beast.
 
I am currently running 130 watts of pc's on my 35 gallon mixed tank with some softies and a few lps. I am in the process of buying equipment for a new 55 gallon tank I bought and want to put t-5 lights on the new tank. What light fixture would you recomend I go with. I would like to try some sort of sps in the future too. Thanks
 
Ok, here is a question I havent really seen asked yet, though I must admit that I havent read the entire thread... But here goes nothing... I hope it dosent sound too stupid..

I have a 84 inch tank. I was considering getting a pair of 36x10 ATI fixtures to cover it with. That only comes out to 72 inches though. Even though I am sure that this would provide the light needed for pretty much whatever I want to keep (tank is 24 deep), I had the idea that a 36 inch fixture and a 48 inch fixture would cover the whole thing. 2 48 inchers would hang over by about 6 inces on each side... cant have that. The 2 36 inchers would lack coverage for about six inches on each side. Not sure how it would look also.
One question is, because the lights are different watts (39 watts vs 54 watts), would the difference be noticable to the eye, or would the longer leingth of the 48's account for the higher wattage. Would I see a difference, and would the corrals know the difference?
.... To be honest, I am not even sure what it would look like to have 2 different sized fixtures on the top of the tank, it might just look goofy. Then again, it might look ok too. The pair of 36's would give the tank a more symetric look, but I am also loking at light output.

It was just a thought. I guess that 36x2 at 10 lights each would put out enough light, especially if i centered them, but I thought I would ask about the light output differences anyway. Was thinking that with 54 watts spread out over 48 inches, just might be like 39 watts spread over 38 inches...

Just asking.... thanks
 
Last edited:
<a href=showthread.php?s=&postid=14440013#post14440013 target=_blank>Originally posted</a> by harleyreefer
Ok, here is a question I havent really seen asked yet, though I must admit that I havent read the entire thread... But here goes nothing... I hope it dosent sound too stupid..

I have a 84 inch tank. I was considering getting a pair of 36x10 ATI fixtures to cover it with. That only comes out to 72 inches though. Even though I am sure that this would provide the light needed for pretty much whatever I want to keep (tank is 24 deep), I had the idea that a 36 inch fixture and a 48 inch fixture would cover the whole thing. 2 48 inchers would hang over by about 6 inces on each side... cant have that. The 2 36 inchers would lack coverage for about six inches on each side. Not sure how it would look also.
One question is, because the lights are different watts (39 watts vs 54 watts), would the difference be noticable to the eye, or would the longer leingth of the 48's account for the higher wattage. Would I see a difference, and would the corrals know the difference?
.... To be honest, I am not even sure what it would look like to have 2 different sized fixtures on the top of the tank, it might just look goofy. Then again, it might look ok too. The pair of 36's would give the tank a more symetric look, but I am also loking at light output.

It was just a thought. I guess that 36x2 at 10 lights each would put out enough light, especially if i centered them, but I thought I would ask about the light output differences anyway. Was thinking that with 54 watts spread out over 48 inches, just might be like 39 watts spread over 38 inches...

Just asking.... thanks
Click to expand...

Yes, the longer length accounts for the higher wattage. Two odd sized fixtures would look fine to the eye...

However, unless you plan on keeping SPS corals right up the edge of your tank (which I am doing almost), after living with a Powermodule and T5's, I think a little less light on the ends of a tank, ideal for LPS and zoas/palys, is a great idea. It will allow you more bio-diversity of corals.

I have a Ponape Birdsnest SPS coral, which likes lower light for the best two tone green/purple coloration, and even partially shaded by a rock on the end of the tank, and ON THE SANDBED, it's still not coloring up after 5 months (though it grows well), and only has hints of green on its body and hints of purple on its tips. There is just too much light for it in my tank (and it came from a colorful colony in a tank lit by a 6 bulb TEK T5 fixture no less!) And I have palys that are doing fine under rocks in the shade; palys on the sandbed directly under a Blue+ bulb (followed by an Aquablue Special) won't fully extend...

I would do 2 x 36" on a 84", no doubt... Are you thinking of the 8 bulb models...?
 
Does anybody know if Reefgeek ships to Winninpeg? If not does anybody know which fish/supplies stores sell and ship to Winnipeg besides J&L Aquatics?
Thanks
 
hi grim
what would you suggest for a 90 gallon with soft coral only
i have two lighting systems a retro 4 bulb or as 6 bulb extreme pro not sure which one i will use
what bulb configuration would you suggest for each fixture over a 90
to make the colors pop in the tank
thanks in advance
 
Hey Grim and anyone else who can help.

I am ordering a Retro setup from Reefgeek for a 72G BF. Its gonna be 5X54W with two Ballasts. One is going to be an Icecap 430 firing 3 bulbs and an advance ballast for the other 2 bulbs.
I am looking for alot of blue pop but need to be able to support SPS and softies! My questions are:

What 5 bulbs would you go with and how would you arrange them?

Also which 3 bulbs would you overdrive with the IC430?

Thanks for your help and the amount of time you have spent helping fellow reeferz!
 
HI Grim ,



I ordered these bulbs from the ReefGeek, ATI blue plus, UVL 75/25, ATI Aqua sun and ATI Blue plus. What will be the over all color be? Also what is the difference between ATI Aquablue and ATI Aqua sun ?
 
t5

t5

t5

I have SPS's on top and yumas,rics,shrooms and zoos lower .in a 120 with a tec 8 bulb setup.


First what light does coralline like ?

Also what bulb combo for some growth with lots of color.

Any of : ?


Front
ATI Blue Plus
KZ Fiji Purple
GE 6500K Daylight
ATI Blue Plus
GE 6500K Daylight
KZ Fiji Purple
ATI Blue Plus
ATI Blue Plus

Front
ATI Blue Plus
ATI Actinic Blue
ATI Pro Color
ATI Blue Plus
GE 6500K Daylight
ATI Blue Plus
ATI Actinic blue
ATI Blue Plus

Front
Giesemann: PowerChrome Actinic Plus
Giesemann: PowerChrome Actinic Plus
Giesemann: PowerChrome Pure Actinic
ATI Procolor
Giesemann: PowerChrome Actinic Plus
UV Lighting Aquasun
Giesemann: PowerChrome Aqua Blue +
Giesemann: PowerChrome Actinic Plus

Current Tanks: 120 Gal, Tek T5 48" X 8 ,40 Gal sump,ASM G2, Mag 18
Interests: reef,21000 gal kio pond's and stream
 
Hi Grim,

I'm running a setup that you suggested to me a while back and I'm pretty happy with it, but I'm looking for a little more "pop" in the coloration of corals. I also plan on overdriving my bulbs by switching over to IC ballasts.

I currently have:

(Front)
UVL Super Actinic
ATI Blueplus
UVL Aquasun
ATI Blueplus
UVL Aquablue
ATI Blueplus

Any suggestions in terms of bulb change/bulb placement? Thanks!
 
<a href=showthread.php?s=&postid=14442581#post14442581 target=_blank>Originally posted</a> by jerome736
Hi Grim,

I'm running a setup that you suggested to me a while back and I'm pretty happy with it, but I'm looking for a little more "pop" in the coloration of corals. I also plan on overdriving my bulbs by switching over to IC ballasts.

I currently have:

(Front)
UVL Super Actinic
ATI Blueplus
UVL Aquasun
ATI Blueplus
UVL Aquablue
ATI Blueplus

Any suggestions in terms of bulb change/bulb placement? Thanks!
Click to expand...


ATI Blue Plus
UVL 75/25
ATI Blue Plus
UVL Aquasun or GE 6500K
ATI Aquablue
ATI Blue Plus
 
Todd.

.... I was actually thinking of the ten bulb setup. Compaired to the expence of the AYI fixture, theprice of the 10 bulb setup is minimal vs the 8 bulb setup, so i figgured that I might as well get the extra 2 bulbs (4 bulbs with the both of them. The extra bulbs was one of the factore in deciding to go with 2x36" fixtures, instead of getting the 14 bulb, 72" constilation. I also like the lok of the ATI fixtures as well, but mainly, I hear the ATI is a higher quality fixture. i hope it is, since the ATI 36x10 bulb fixture is about the same price as a 72"x14 bulb constilation fixture. The 8 bulb ATI was not much less than the 10 bulb.
 
Harley, you are going for an SPS focus, correct? The ten bulb PM will fit over 24", but you are talking a lot of light...! My tank is 26", and my tank is lit front to back... If you want to keep zoas or a lot of LPS, I would plan on plenty of shaded areas, even caves... My best growing and happiest palys are in caves and get most of their light as reflection off of the sandbed...
 
grim i got my lights but no instructions we know how to hook the ballast up but putting the bulds in sockets and pins and all the other stuff do you know some place on the web that shows or something im stuck
 
Nothing is easy

Nothing is easy

Hello to all... I read through the entire thread and did not see an example of what I am looking for... I did see the dedication of several individuals to this forum and I can't thank you enough for the knowledge that you are passing on to the masses...

I have a 36"x36"x26"H tank that I will like to have sps, lps and clams (clams in the sand). Tank will be viewable from all 4 sides. I have the tank set up in a location where I cannot support a fixture from the ceiling so it must be a tank mount. I also can not have a canopy so that the top remains open...

I assume that I would need a 36" T5 fizture with tank mounting brackets... Which fixture(s) are the best for my application and a recommendation on bullbs would be greatly appreciated...

See, nothing is easy...

Thanks so much in advanced...
 
Status
Not open for further replies.

Similar threads

Dr. Reef
XMAS Sale @ Dr. Reef's
Replies
0
Views
213
Dr. Reef
Dr. Reef
Dr. Reef
Dr. Reef's XMAS Sale
Replies
0
Views
440
Dr. Reef
Dr. Reef
Dr. Reef
Affordable Aquaria by Dr. Reefs Black Friday Sale
Replies
0
Views
155
Dr. Reef
Dr. Reef
Guygettnby
Stuck between 2 skimmers...
Replies
12
Views
2K
Guygettnby
Guygettnby
jasonfrey
Enter to WIN a Reeflo AC3000 Submersible Pump - Ends 3/10/2026
Replies
6
Views
273
jasonfrey
jasonfrey
Back
Top