Tnze 9015

Suffer Well

New member
I am setting up a 180 gallon reef system with a custom sump that will fill the stand. I was wondering if a Tunze 9015 skimmer would be a good choice of a skimmer. It is rated to 396 gallons. Anyone that has used this model, can i hear what you think of it and how well it worked for you? I am limited on hight of a skimmer i can use and I know that tunze's skimmer is nice and little. If this isn't worth while I might just go ATI Bubble Master. Thank You
 
i got one 9010 for my 120gal but hasn't have it running yet.

I know someone using 9010 for 240g show tank, and it works perfect. however, as far as i know 9010 and 9015 is basically the same thing, only that 9015 is taller and bigger cup.

the water throughput is 317 and air capacity is 171g, which is the same as 9010. either way, i think you'll be happy with Tunze.
 
Re: Tnze 9015

<a href=showthread.php?s=&postid=9611038#post9611038 target=_blank>Originally posted</a> by Suffer Well
I am setting up a 180 gallon reef system with a custom sump that will fill the stand. I was wondering if a Tunze 9015 skimmer would be a good choice of a skimmer. It is rated to 396 gallons. Anyone that has used this model, can i hear what you think of it and how well it worked for you? I am limited on hight of a skimmer i can use and I know that tunze's skimmer is nice and little. If this isn't worth while I might just go ATI Bubble Master. Thank You

An important ? is what kind of tank your going to do. This is from Tunze's website:

"Low sensitivity
In soft coral aquariums with long-polyp corals and anemones, for example, the share in dissolved organic matter may be higher, sometimes it may even be vital. In this type of aquarium, the recommended aquarium volume can be used without deduction.

Medium sensitivity
A medium organic stability is usually found in mixed aquariums inhabited with soft and stone corals (LPS). Filter-feeding animals, sponges, et cetera, are found there frequently as well. For these aquariums, a reduction of about 20 per cent of the skimming capacity is calculated. A skimmer for 1,000 litres (264 US gal.) should thus be used for an aquarium of about 800 litres (211 US gal.) which has this kind of reef design.

High sensitivity
Aquariums with primarily small-polyp stony corals (SPS) require an especially high degree of purity. They should have no load of phosphates or nitrates worth mentioning. Good oxygen saturation and very clear water are the pre-requisites. Comline DOC skimmer is also often used as a “stand-alone” solution in these aquariums. This type of aquarium should be reduced by about 40 per cent in volume for the skimmer volume mentioned.

High sensitivity and high load
Hard coral aquariums with a high population of fish require an extremely high skimming capacity. The skimmer has to ensure the degree of purity for the hard corals at an above-average high fish load. If the Comline DOC skimmer has to operate as a “stand-alone” solution here, a high performance is required. This type of aquarium should be reduced by up to 60 per cent in volume for the skimmer volume mentioned."

I have this skimmer, it will be getting fired up this week, I have read very good reviews on this website on it. I got it for the same reason as you're doing- original stand was short. you can also get the drain kit so it goes through a tube into a container and you wont have to empty the cup as often.

I have a 215 and plan on having a mixed reef with med. fish stocking, so I'll probably upgrade to the 9020 in a year or two. Hope this helps and good luck!:rollface:
 
Last edited:
Thanks guys. I was thinking the Tunze myself, as i own a store and we are a Tunz Partner. So I can get it for a killer price :p
 
Ok time for my stupid question of the night. All I notice different between the 9010 and the 9015 is the 9015's collection cup is taller, but doesn't pump more bubbles or water. So wouldn't that it wouldn't be able get the bubbles as high in the lift area and not work as well as its shorter necked brother the 9010?
 
not stupid at all, the unit is a little taller and has a larger collection cup....not worth the extra cost!
 
Re: Re: Tnze 9015

Re: Re: Tnze 9015

<a href=showthread.php?s=&postid=9613292#post9613292 target=_blank>Originally posted</a> by SHAWNLX86
An important ? is what kind of tank your going to do. This is from Tunze's website:

"Low sensitivity
In soft coral aquariums with long-polyp corals and anemones, for example, the share in dissolved organic matter may be higher, sometimes it may even be vital. In this type of aquarium, the recommended aquarium volume can be used without deduction.

Medium sensitivity
A medium organic stability is usually found in mixed aquariums inhabited with soft and stone corals (LPS). Filter-feeding animals, sponges, et cetera, are found there frequently as well. For these aquariums, a reduction of about 20 per cent of the skimming capacity is calculated. A skimmer for 1,000 litres (264 US gal.) should thus be used for an aquarium of about 800 litres (211 US gal.) which has this kind of reef design.

High sensitivity
Aquariums with primarily small-polyp stony corals (SPS) require an especially high degree of purity. They should have no load of phosphates or nitrates worth mentioning. Good oxygen saturation and very clear water are the pre-requisites. Comline DOC skimmer is also often used as a “stand-alone” solution in these aquariums. This type of aquarium should be reduced by about 40 per cent in volume for the skimmer volume mentioned.

High sensitivity and high load
Hard coral aquariums with a high population of fish require an extremely high skimming capacity. The skimmer has to ensure the degree of purity for the hard corals at an above-average high fish load. If the Comline DOC skimmer has to operate as a “stand-alone” solution here, a high performance is required. This type of aquarium should be reduced by up to 60 per cent in volume for the skimmer volume mentioned."

I have this skimmer, it will be getting fired up this week, I have read very good reviews on this website on it. I got it for the same reason as you're doing- original stand was short. you can also get the drain kit so it goes through a tube into a container and you wont have to empty the cup as often.

I have a 215 and plan on having a mixed reef with med. fish stocking, so I'll probably upgrade to the 9020 in a year or two. Hope this helps and good luck!:rollface:


Thank you for posting that. Very important.
 
Yes I know about that and its all in good info. But If I would stick them next to each other in the sump I want to know which will pull more skimate out. Since the 9015 and the 9010 do the same water and air amounts i want to know if there is a difference. Sadly If I had the height clarance I might be lookng into Deltec.
 
you could always get the 9020 which is essentially two 9010's connected or get an ATI bubblemaster 200 or 250 depending on your budget:)
 
I'm just getting the 9020 this way I think I will safley be able to keep acroporas and clams and my other corals. And as far as fish I will only have Yellow Tang, Blue Tang, Midas Blenny, 6 Line Wrasse, Randal's Shrimp Goby, Black Clown, and maybe a Helfriches Firefish. I'm more of a coral and invert guy.
 
I like the Tunzes, but think the capacity rating is suspect. A larger cup doesn't increase skimming capacity. Same body, same H2O and air LPH on the 9010 and 9015.
 
Last edited:
That was sort of my thought but then again German Engineering is hard to beat. And for a product to be in the European market where the marine hobby is much more advanced than here it has to have some truth to what they say.
 
LOL. In this case, German engineering is putting a bigger cup on the same skimmer body and nothing more. Nothing wrong the the 9010 or 9015, but the only difference is how often you have to empty the cup. Duct tape two 9010s together, and put a foam extractor in place of the cups and you have a 9020.

tunze915.gif

tunze9010.gif
 
Yea i know. But I have dealt with a 9010 and they could easily change how its configured on the inside to get a higher bubble level.
 
Well, the taller cup does give it a taller riser, but come on now. This is basically a 4" body skimmer with 650 LPH air draw. 396G capacity??
 
Back
Top