TS operating instructions

[ReeferAl]

I'm curious. Has anyone put together some instructions on operating the Stream multicontroller that are more clear. The manual really does not describe what each of the controls does. Their instructions seem rather incomplete and unclear. I have just kind of randomly picked some settings, but it would be nice to be able to optimize the settings more.
Allen

 

[rvitko]

I see you have 4 Streams so you can use all the programs. In the top mode setting Tide Mode, the pumps in the first socket of each channel are on and then after the interval the other two take over. While on the pumps pulse at the interval and intensity you set- this mode works best with two pumps on each end of the tank. The center setting is Pulse Mode- all four pumps are on and pulse. This mode works best with all 4 pumps on one side, it can also work with 2 on each side but I would set the channels at opposite pulse intensities i.e 30% and 100% on Channel A and 100% and 30% on Channel B. Sequence mode is the last mode- the pumps come on in sequence 1-4 to create a surge. This mode is best with the pumps all on one side or along the back wall.

 

[ReeferAl]

Roger,
Thanks, that helps.
Allen