Tunze 1073.020

[jdellman]

Roger,

I would like to use the 1073.020 with a Geo media reactor, and the reactor has a 1/2" inlet. Can you tell me the flow rate for the pump with a 1/2" outlet, as I would like to use it to feed my skimmer directly.

The head is about 2' (over the side of the trough), but the Geo reactor is an upflow and is 22" tall, so I'm not sure if the total head would be 2' or 4'.

Thanks,

 

[rvitko]

I guestimate with tubing restriction, reactor, tubing length, you are at about 5ft of head pressure equivalent. At this height flow should be about 130gph.

 

[jdellman]

Thank you.