Tunze Calcium Reactor

[Marcio]

Hi there, i'd like to get some information about this Tunze Calcium Reactor:

Is this the only tunze calcium reactor model? is it recommended to how many liters tank?

Thanks in advance.

 

[Tomasa]

Go t www.Tunze.com they have all manuals in PDF format you can download anything from there.

 

[Tomasa]

http://www.tunze.com/fileadmin/gebrauchsanleitungen/x3170.8888.pdf

try this link straight to it
or this and scroll down.

http://www.tunze.com/149.html?&L=1&C=CA&user_tunzeprod_pi1[predid]=-infoxunter011

 

[Aquadepot]

Hi Marcio,

A quick run down

Dimensions: L125 x W113 x H300 mm (L4.9 x W4.4 x H11.8 in.)
Immersion depth: approx. 60 to 280 mm (2.3 to 11.0 in.)
Filling volume: 1,200 ml (42.2 fl. oz.)
Delivery: up to 1,9 l/h (0,5 USgal./h)
For aquarium sizes: 200 to 1,000 litres (52 to 264 USgal.) salt water

Cheers
Graeme

 

[Marcio]

Thanks Tomasa and Aquadepot!

have u ever seen this reactor working, is this a good choice?

 

[Aquadepot]

Marcio,

I am bias as I sell them but if you are looking for an intank solution simple plug and play it works well when used/sized reccomended.For very large systems you will need an extension or maybe a different brand for high calcium demand.

Regards
Graeme

 

[Marcio]

Thanks Graeme!

i'll try it and, if necessary, i'll ask for u help to adjust.

Tks!

 

[Tomasa]

I used to have older version of this on a 108 gal tank with small SPS load and it worked very well,
The only down side was it would get plugged up once in a while so i would use large nedia, also if you go for it before you put water in to it go over all the seams with a creasy glue. Mine had a very small water leak and eventhough it was in the sump it took me looooong time to figure out why i have no flow thrugh my drip output line.
Nice unit overall but keep in mind that any Calc. reactor will lower the PH so prepaire to dose Klakwasser. or buy PH controller.
hth