Tunze Control Question for new users

[AQD_ottawa]

We have received many requests lately from new GHL users or people looking at switching over to GHL Profilux regarding GHL Tunze control and specifically what does it cost to set this up on the GHL profiLux and does it require further expansion to run it?

Well cost - To run one pump it costs ALL OF $16 bucks to set up :lolspin: NO thats not a miss print, you see GHL comes with Tunze control already built in, no external module required, no add on box, just a cable!

If you want to run two Tunzes = 2 cables

You can run up to 8 Tunze pumps from the profiLux plus II and more in time from the ProfiLux 3!

GHL can also control Tunze Wave boxes in exactly the same way.

Ok so what functionality do you get?

Just have a look at this screen shot for a snap shot of the control that can be achieved

Wave options are

Sinus waves
Right angles wave long
Right angled wave short
No waves

Modes are

No current
Permenant
permenant opposite
Sequence
Sequence1
Surge1
Surge2
Random

All modes can then be fine tuned to suit your own tank.

All that without going into feed pauses and night modes all available as well within the free software that comes with the ProfiLux!

So for $16 you can really release the inner beast of the Tunze streams using GHL ProfiLux controllers. :bounce1:

 

[AQD_ottawa]

For set up questions please go to www.aquariumcomputer.com/forum

 

[zhangg3]

It will probably answer a lot questions if you can post:

- one screen shot of the 1-10V interface and
- one screen shot of the Pumps settings doing "Sequence 1" and "Sinus Waves".

Thanks!

 

[AQD_ottawa]

 

[zhangg3]

This is very helpful, thank you!

 

[docwells]

Can the profilux run the nanowavebox now?

 

[AQD_ottawa]

Providing it uses the same connection yes, I think it does