Tunze Osmolator 3155

[MarkL]

Hello, I am interested in purchasing this setup but have a few questions. I am planning on having the RO water in the basement directly below the tank which is upstairs. Because of this I am a little concerned about head height maximum distances.

I think I read that the tubing is 6 ft but am unsure if that is accurate. Is the power cord from the controller to the pump the same length as the tubing? The sensors will be close to the controller so that isnt my concern.

Thanks!

 

[jcw]

I just set mine up last pm.

The maximum recommended height in the manual is 72".

I don't think the line is more than 6ft, But you can probably extend it.

The power cord for the pump would also be easily extendable. It connects to the short cord from the main unit via a screw terminal.

 

[rvitko]

It comes with 3m, a tad over 9ft of tubing, the max head is 9ft, at 9ft flow equals 0gph, below 8ft it should work but less will result in more flow/faster top off.