Tunze Osmolator 3155

[MarksReef]

Im eyeing the Tunze Osmolator 3155. How far away can it pump from and is there any head pressure it can handle?
Also I see this as a response:
I am 99% sure there is a switched outlet that can be added to an osmolator, though Roger (rvitko) in the Tunze forum could answer that better.
Can you elaborate if it does and what it does if it does LOL.
Marksreef.

 

[rvitko]

It can handle 8ft of head pressure and includes 9ft of tubing. A longer run is possible but tends to be problematic, more can go wrong as you also have to extend wiring.

The 3150.110 takes the 11V signal and switches an outlet to turn on the pump of your choice up to 900W.

 

[MarksReef]

Thank you.
While your here, is the 1073.05 controllable pump the largest controllable you have?
I see it goes to the top of 792.5 G.P.H. and I would or might want to push that higher but am concerned if I run it on max, the controllable might not be the way to go.
Thanks again.

 

[rvitko]

It is, and keep in mind that the 792 is at 0ft at 4ft it is closer to 550 gph. You can always use 2 and you can run them in series for higher head pressure or seperately for more flow. That also adds some redundancy.