Tunze Osmolator

[gandolf8]

Ok here is what I am trying to do Have 2 Tunze Osmolator Universal. Now one is for my salt water and one is for my plain R/O water. I have the Neptune 3 pro. Have the Conductivity Probe hook up cond to 51 now here is the program That I am trying to run . But this is my problem when the tunze tranfer to one or another they come on and start dumping water in before I know it the sump is almost full if I run one at a time with the other off I am ok any ideas. thx


If Cond < 50.0 Then ATO OFF
If Cond > 51.0 Then AT2 OFF

If Time > 00:00 Then ATO ON
If Time > 00:00 Then AT2 ON

 

[wartskin]

Roger's internet access will be limited this week while he is in Germany and he will not be able to check RC frequently. He will get to your post though please be patient with us in his absence. I am not able to answer your question with any confidence and would hate to give you any false information.

 

[rvitko]

I think a better way to do this would be to only use 1 Osmolator and use your controller to switch a relay between two pumps so the osmolator activates the one that the relay has made a contact for. Can you better describe the problem? Is the osmolator overfilling? Are you using the osmolator as is or with some modification to the sensors? When used alone do the osmolators function normally?

 

[shawnz28]

Roger, someone on the Neptune forum was able to come up with a program for Terry, he is a link for your perusal

http://reefcentral.com/forums/showthread.php?threadid=1398968

 

[shawnz28]

the right link would help
http://reefcentral.com/forums/showthread.php?threadid=1398903