Tunzes not pulsing

[GeneSilvey]

The tunzes at my work stopped pulsing. Its the 7094 controller and I have fiddled with the pulse control knob and it's still not working. Is the controller broken or am I not doing something right?

 

[rvitko]

Do you have the photocell connected? Is it stopped on the bottom knob settings or the top knob settings? Do they still run, just not pulse?

 

[GeneSilvey]

No photocell, the tunzes still run well. The instruction manual is lost. Is there somewhere I can download the manual. Thanks for the quik reply.

 

[xtrstangx]

I figure I'll kill two birds with one stone here.

GeneSilvey, have you been to http://fishheads.org? Its a local KS/MO forum, not really a club but we have frag swaps.

And I also need the manual to the 7094 please. My email is xtrstangx at gmail.com ... thanks for all your help Roger, Tunze rocks.

 

[rvitko]

You might try disconnecting the power to the pumps, checking the multicontroller connections and see how that works. If that doesn't work I suspect some salt or water got in the photocell socket and shorted the socket so the signal is just like night mode being activated.

 

[rvitko]

Genesilvey, I can email a manaul if you PM me an address.

 

[GeneSilvey]

Here is a picture of the way it is set up.

 

[rvitko]

All the knobs are turned to 100% so it isn't set up to pulse, you need to set the top or bottom knobs to a lower speed.

 

[Personifier]

<a href=showthread.php?s=&postid=7840599#post7840599 target=_blank>Originally posted</a> by xtrstangx


GeneSilvey, have you been to http://fishheads.org? Its a local KS/MO forum, not really a club but we have frag swaps.

And I also need the manual to the 7094 please. My email is xtrstangx at gmail.com ... thanks for all your help Roger, Tunze rocks.

Thanks Roger for the manual and the advice. Works like a champ again.

Max,

This is Jeff from Fish World and Gene works for me. Thanks for the link but we already know about fish heads.

 

[rpisces]

Hi! Roger

My friend bought a second hand Multicontroller 7094 and needs the manual too!

Could you please email to me please!

My email is kckhoo93@hotmail.com or kckhoo93@streamyx.com

Thanks in advance

regards
khoo