Turbelle Placement

[tony varrell]

I have 4 turbells in my tank and would like to know which is the best settings and placement to achieve the most random flow patterns. My dims are 78X30X30 and I have 2 6200 and 2 6100. The tank is SPS dominated I use a Barracuda Gold as a return pump and am turning the tank over approximately 10 times per hour. Thanks

 

[tony varrell]

Forgot to mention I do have a mulitcontroller..

 

[rvitko]

There are a lot of possibilities, I would suggest one of the following, basically try them all.

All 4 pumps on the back wall aimed diagonally across the tank parallel to each other and placed about 18" apart running sequential mode.

2 pumps on each side one slightly higher than the other and about 12" apart use Interval 2.

2 pumps in each corner forming an X using Interval 1 so the pumps in the front corners blow to the back corners and then they switch.