smellzlikefish
New member
Hello, Thanks everybody. First things first, I live in the Philippines. Unless I am using dynamite to collect the rock, there is no ban against collecting the rock. I also own a dive shop here so I am conscience about collecting the rock. And finally there are no LFS in this country that sell cured rock.
I am new to the hobby so I appreciate if you guys keep that in mind.
My tank is 7ft x 21"w x 34"h. With 100 gallon sump, refuge, led lights, monster skimmer, etc. I bought the tank second hand as a complete set up.
I will be using NSW for all my water changes. ( Dive Shop ). I will be collecting my NSW in clean enviroments away from industry & pollution. I will also be getting the sand and rocks from the cleanest areas possible.
Because this is the first cycle / attempt at a tank I do have a few questions that I am having a hard time getting clear answers for.
In the future this will be a reef & fish tank. More emphasis will be given to the fish.
Here we go,,,
I was planning on adding the water, rock, and sand at the same time. Good idea? / Bad idea?
Rock questions.
I have already started to make a pile of cool rocks somewhere on the house reef. ( Dive Shop ). The rocks don't have alot of coraline on them, more algae. They are very porus ranging in color from light brown "sandy" to dark brownish / black. I tried to get a range of differnt rocks.
My question is, once I pull them out of the sea, what should I do to them before putting them in the tank?
I am concerned about hitch hikers that could cause problems for either corals or the fish down the road.
I was planning on scrubbing them. The problem is I don't really know what I want to knock off the rock and what I want to keep. I know coraline is a keeper. But, what kind of stuff don't I want? Should I try to remove the algae? How hard should I be scrubbing?.
I've read about dipping them in fresh water to kill the bad guys. Is that a good idea with super fresh rock? ( The rocks will not be out of water for more than 5 minutes ) I certainly would not want to kill all the good stuff by doing that. If that works and is necessary, please give me some instructions how to do that.
I've also heard that because its a brand new cycle there will such a spike in the tank and that will more than likely kill the bad guys. Any thoughts about that? Keep in mind the LR and DSB, are both considered wild / fresh. I think that will increase the spike if I am not mistaken.
I have quite an elaborate aquascaping plan, so at this moment, I'm not concerned with the aquascaping, The reason for the rock now is to help with the cycle and also to start curing the rock, so that when I start my aquascaping it's already in the curing process. I am thinking of adding about 300 pound of rock at this time, even though in the future with my minimilist aquascaping plan, I am sure I will use less than that down the road.
Are there actual benefits to having more LR than is necessary for the initial cycle? I was thinking this would also allow me more choices in the rocks that I will use in my aquascaping. What I don't use I will toss back into the sea.
It is really hard to find tips and advice about harvesting your own live rock. I guess most people do not have that luxury. I would really appreciate any advice you can offer. If there is something that I am not considering, or there are major problems with this idea, please let me know.
Questions about sand:
I Plan to have a 5" sand bed, I found a caculator online that told me I will need 485 ls of dry sand for a 5" SB. I have no idea how much that will be using wet sand, but it gives you guys an idea of the amount of sand we are talking about.
How can I test the sand to make sure it will be aquarium safe? I have read that not all sands will be beneficial.
A local reef guy told me there is a way to test the sand by putting into a tube and putting vinegar in the tube and watching for bubbles? I don't really undertstand what he was talking about? Any thoughts about that?
Once I collect the sand is there anything that I can do to remove any of the bad things that could be there in the sand? Or is it throw it in the tank as is, fresh from the sea?
The more I think about it, the more I like the idea of mixing black and white sand together to get that salt and pepper look.
There are islands around that have very black volcanic sand. I've been advised by a local reef guy that I have to be more cautious in choosing the black sand. He made a comment about running a magnet over the sand, but again, I wasn't really following the reasoning behind it. Any thoughts about that?
Thanks again for taking the time to clarify a few things for me.
I will be posting pics as soon as I have something to take pics of.
You can check out my other thread about planning this scorpion tank here,
http://www.reefcentral.com/forums/showthread.php?t=2034764&highlight=help+plan+a
Thanks again,
Shawn
( I hope I don't get beat up for wanting to get rock from the sea,, please remember there are no LFS or things like that here )
I am new to the hobby so I appreciate if you guys keep that in mind.
My tank is 7ft x 21"w x 34"h. With 100 gallon sump, refuge, led lights, monster skimmer, etc. I bought the tank second hand as a complete set up.
I will be using NSW for all my water changes. ( Dive Shop ). I will be collecting my NSW in clean enviroments away from industry & pollution. I will also be getting the sand and rocks from the cleanest areas possible.
Because this is the first cycle / attempt at a tank I do have a few questions that I am having a hard time getting clear answers for.
In the future this will be a reef & fish tank. More emphasis will be given to the fish.
Here we go,,,
I was planning on adding the water, rock, and sand at the same time. Good idea? / Bad idea?
Rock questions.
I have already started to make a pile of cool rocks somewhere on the house reef. ( Dive Shop ). The rocks don't have alot of coraline on them, more algae. They are very porus ranging in color from light brown "sandy" to dark brownish / black. I tried to get a range of differnt rocks.
My question is, once I pull them out of the sea, what should I do to them before putting them in the tank?
I am concerned about hitch hikers that could cause problems for either corals or the fish down the road.
I was planning on scrubbing them. The problem is I don't really know what I want to knock off the rock and what I want to keep. I know coraline is a keeper. But, what kind of stuff don't I want? Should I try to remove the algae? How hard should I be scrubbing?.
I've read about dipping them in fresh water to kill the bad guys. Is that a good idea with super fresh rock? ( The rocks will not be out of water for more than 5 minutes ) I certainly would not want to kill all the good stuff by doing that. If that works and is necessary, please give me some instructions how to do that.
I've also heard that because its a brand new cycle there will such a spike in the tank and that will more than likely kill the bad guys. Any thoughts about that? Keep in mind the LR and DSB, are both considered wild / fresh. I think that will increase the spike if I am not mistaken.
I have quite an elaborate aquascaping plan, so at this moment, I'm not concerned with the aquascaping, The reason for the rock now is to help with the cycle and also to start curing the rock, so that when I start my aquascaping it's already in the curing process. I am thinking of adding about 300 pound of rock at this time, even though in the future with my minimilist aquascaping plan, I am sure I will use less than that down the road.
Are there actual benefits to having more LR than is necessary for the initial cycle? I was thinking this would also allow me more choices in the rocks that I will use in my aquascaping. What I don't use I will toss back into the sea.
It is really hard to find tips and advice about harvesting your own live rock. I guess most people do not have that luxury. I would really appreciate any advice you can offer. If there is something that I am not considering, or there are major problems with this idea, please let me know.
Questions about sand:
I Plan to have a 5" sand bed, I found a caculator online that told me I will need 485 ls of dry sand for a 5" SB. I have no idea how much that will be using wet sand, but it gives you guys an idea of the amount of sand we are talking about.
How can I test the sand to make sure it will be aquarium safe? I have read that not all sands will be beneficial.
A local reef guy told me there is a way to test the sand by putting into a tube and putting vinegar in the tube and watching for bubbles? I don't really undertstand what he was talking about? Any thoughts about that?
Once I collect the sand is there anything that I can do to remove any of the bad things that could be there in the sand? Or is it throw it in the tank as is, fresh from the sea?
The more I think about it, the more I like the idea of mixing black and white sand together to get that salt and pepper look.
There are islands around that have very black volcanic sand. I've been advised by a local reef guy that I have to be more cautious in choosing the black sand. He made a comment about running a magnet over the sand, but again, I wasn't really following the reasoning behind it. Any thoughts about that?
Thanks again for taking the time to clarify a few things for me.
I will be posting pics as soon as I have something to take pics of.
You can check out my other thread about planning this scorpion tank here,
http://www.reefcentral.com/forums/showthread.php?t=2034764&highlight=help+plan+a
Thanks again,
Shawn
( I hope I don't get beat up for wanting to get rock from the sea,, please remember there are no LFS or things like that here )