Vinny Kreyling
Premium Member
Smocky,
What sized tank & depth?
What sized tank & depth?
Vertex Illumina Club
- Thread starter deangelr
- Start date
ClownBubbaJoe
Member
I need the cord and the software for a Vertex Illumina, where can I purchase them ?
I tried this address, angd got to the website, but says it's under construction.
vertex Industries, Huntington Beach, CA
http://www.vertextechnologies.net
I tried this address, angd got to the website, but says it's under construction.
vertex Industries, Huntington Beach, CA
http://www.vertextechnologies.net
Last edited:
Hudds
New member
Try here http://www.vertexaquaristik.com
ClownBubbaJoe
Member
I'll have to send the link to my office computer, as this tablet doesn't support plug in's ?
Thanks !
Thanks !
ClownBubbaJoe
Member
NI looked at a sticker on the light and reads,...600-200, and 00049E.
So, which model is it ?
SR200 ?
I just clicked on the SR200 and all the others as well,...on the list, and it refresh's the page, but nothing happens ?
Don't get it, but when the clicked on the pop-up, it revield the site anyway ? Computers !?
Anyway, still confused on which model I have ?
So, which model is it ?
SR200 ?
I just clicked on the SR200 and all the others as well,...on the list, and it refresh's the page, but nothing happens ?
Don't get it, but when the clicked on the pop-up, it revield the site anyway ? Computers !?
Anyway, still confused on which model I have ?
Last edited:
Vinny Kreyling
Premium Member
ClownBubbaJoe,
That phone # I listed above should get you to Adam & he is the rep in the area.
Serial # & all other info can be found through the display on the end.
That phone # I listed above should get you to Adam & he is the rep in the area.
Serial # & all other info can be found through the display on the end.
ClownBubbaJoe
Member
Pool Man
New member
Couple of questions hopefully someone will here will know. It appears one of my standard Blue/White pads went out on my 3ft SR360.
#1 Are the pads the same on the SR260 as the SR360? Aside from the power output, I really don't know the difference. Is it a viable option?
#2Does anyone have an extra they'd sell? PM me if you do!
#1 Are the pads the same on the SR260 as the SR360? Aside from the power output, I really don't know the difference. Is it a viable option?
#2Does anyone have an extra they'd sell? PM me if you do!
Vinny Kreyling
Premium Member
Pool Man,
1 Very important distinction with the pads is their location.
Each pad is programmed differently in regards to east to west or west to east sequence.
I suppose if you don't use it you may be fine but not positive on that.
You can use the 260 but there will be a color & power difference.
Try Adam @ the # I listed above if needed. #1438
1 Very important distinction with the pads is their location.
Each pad is programmed differently in regards to east to west or west to east sequence.
I suppose if you don't use it you may be fine but not positive on that.
You can use the 260 but there will be a color & power difference.
Try Adam @ the # I listed above if needed. #1438
Pool Man
New member
Forgive my ignorance on the subject, I'm more of a plug-n-play guy. Physically, I'm sure it would fit. I'm not overly concerned with the east/ west function (didn't use it). If I can live with the color of SR260 pads I'd be concerned with the power going to it? I've been in touch with Adam. Waiting on a reply. He quoted me a price, but not sure if it was for a single pad or a set. If it was for a single pad... I may have to consider parting my fixture out!
Vinny Kreyling
Premium Member
Hey no worries not all of us including myself are up to snuff on this.
I have been looking into pads myself.
With the currency fluctuations they run in the neighborhood of $220 for 1 unit.
My fixture has both units & I was told the 260's would be over driven??
IF you part out let me know.
I have been looking into pads myself.
With the currency fluctuations they run in the neighborhood of $220 for 1 unit.
My fixture has both units & I was told the 260's would be over driven??
IF you part out let me know.
Vinny Kreyling
Premium Member
Mixed with others no much.
Vinny Kreyling
Premium Member
You can
BUT-- if you use sunrise & sunset they have to be from the same relative position.
#3 replaces #3, #5 replaces #5 etc.
BUT-- if you use sunrise & sunset they have to be from the same relative position.
#3 replaces #3, #5 replaces #5 etc.
flakey
Member
I don't use sunrise/sunset so that should be fine. Is it as easy as unscrewing the old pad our and screwing the new one in?
Do I need the mounting kit? And how do the pads talk to each other? Is there a socket it connects on the back of each pad?
What are the chances of messing up the whole light fixture? It's an expensive kit...
Sorry for all the questions.
Do I need the mounting kit? And how do the pads talk to each other? Is there a socket it connects on the back of each pad?
What are the chances of messing up the whole light fixture? It's an expensive kit...
Sorry for all the questions.
Vinny Kreyling
Premium Member
Have never done anything with mine but I do know there are prongs on the back of the units that pierce the wires to make contact.
Adam could answer your questions as their rep.
714-272-6544
Adam could answer your questions as their rep.
714-272-6544
Similar threads
