Vertex Illumina Club

hi Vinny,
I wonder if Adam has changed his number because too many people are calling him. I tried calling and I think the number is no longer active.
Do you have instructions on resetting the pads by any chance?
 
flakey said:
hi Vinny,
I wonder if Adam has changed his number because too many people are calling him. I tried calling and I think the number is no longer active.
Do you have instructions on resetting the pads by any chance?
Click to expand...

That number is absolutely active, I just called and the voicemail says he is in Germany until yesterday. I suspect it will ring through to him soon. It also suggested emailing him or calling the main number at 714-274-6550.
 
flakey said:
Hi guys,
i have a sr260 1200 and one of the the main Pads is not working. I have another shorter sr260 600 that I am thinking about closing down later this year. Rather than sell it Can I take one of the pads and put it in my sr260 1200mm light?
Does anyone have instructions?
Click to expand...

The pads are individual to each light and assigned a spot in the fixture, swapping them between fixtures or placement within the original fixture will not work.
 
Well I've had my Illumina SR260 4' fixture for over 6 years now.

It's worked flawlessly. I've never messed with it or anything.

My questions, is if I wanted to update with new modules like UV/red, etc....Can we still get these from anyone? Also, are they expensive?
 
Yes, something to do with the controller, basically the same thing that shut down Solaris lighting. There have been stories on it.
Bummer for us here in the states.
Don't understand how others do it.
 
I had mine a free years love these light. But I'm finally upgrading to Mitras.


Sent from my iPhone using Tapatalk
 
Hello All,

So i just purchased a SR 260 4' version from a fellow reefer i am having a little trouble setting everything up with the V-Stick. How do i set up the main control the V-stick is recognized however it will not let me start making a schedule or anything. Also if i were to get a schedule from someone is there a way to upload that schedule to my light fixture Via the V-stick?
 
You might need to run in administrator mode took get the vstick to recognise the light.


Sent from my iPhone using Tapatalk
 
do a youtube search. first thing is to install the software, get the software to recognise the stick, connect to the light setup a schedule and then upload the program to the light.
 
Last edited:
Finally after 6 years+ all the fans in my SR200 6' fixture are not working. Has anyone tried to replace them and is it possible to do so?
 
I had a fan not working, I was told to remove the end opposite the display to check the center connection. It had come off.
That is where I would start, the center sections will move in the slot.
I was NOT able to remove the power cord so that could be a stumbling block.
Adam may be able to clear things up if you don't want to try first.
 
Ok so i am having a issue were my fixture is burning my coral the tank is a 80 gallon 48x24x16 the fixture is a 4' 260 model and it is sitting roughly 8-9 inches above the water. I currently have the fixture maxing out blue and royal at 50% and white maxing at 15% for 2-3 hours a day on a 13 hour schedule. I am hoping that someone else has experience with shallow tanks and this light.
 
You must log in or register to reply here.

Similar threads

C
Maxspect jump led issue
Replies
0
Views
86
Cruzersmith
C
jay505
Is STARS still an active club
Replies
3
Views
48
griss
griss
davisl
SOLARIS PFOaquatics with I5 Power Supply - AUTO settings question, there a manual?
Replies
5
Views
320
oreo57
oreo57
Timfish
WooHoooo! Or, Guess the Parents.
Replies
9
Views
559
C.Eymann
C.Eymann
L
Equipment help
Replies
8
Views
60
lilredwuck
L
Back
Top