video : micro bubble problem

[latazyo]

my sump is a standard 20L split into 3 pretty equal sections

I'll do a more detailed drawup later today (or tomorrow) that shows relative heights of baffles, etc

at this point draining the sump and re-siliconing/positioning baffles is out of the question

but we shoudl be able to re-route it without having to do that at all

 

[Schplitter]

Like I said before, put the pump all the way to one side and the drain on the other with the skimmer and your problems will be history...

BK

 

[latazyo]

new idea

what do you think

I'll just have to rip out the tall baffle and it should work with minimal re-routing of the return pump plumbing

this will give me 3 under baffles...no bubbles should be able to make it through that

especially that slow moving middle section

 

[breutus]

I have my sump Basically as your proposed is set up, the only difference is that I have two extra overs in the middle of your unders (because I wanted a DSB in the middle) I am running A mag 9.5 and still get a lot of bubbles though the sump and tank, bk has seen it, he thinks my baffles are a little close together which might make all the difference but ether way there is still Alot of bubbles.

 

[latazyo]

I have rerouted everything and removed the baffle to be as per the proposed drawing

if I still have bubbles Im going to go crazy and then downgrade my pump...Ive fooled around with this **** too much

 

[latazyo]

well.......it appears that it may have minimally helped


humpf