Wavebox placement recommendation needed

[Acrylics]

Hi Roger & all,

I'm building a tank for a customer and we are going to use false overflow walls to conceal a Wavebox and 3 Streams.

What I need to know is the recommended distance from the center of the (Wavebox) effluent hole to the nominal waterline (power off) Any recommendations on this?

Also, what are the overall dimensions of the Wavebox?

What are the overall dimensions of the Streams?

Is 2.25" (56mm) going to be a good sized hole to allow for clearance or should we use larger?

I was sent the catalog and these were not in there. Hope my questions make sense, if you need further info from me - just let me know

Thanks in advance.

James

 

[Jar*Head]

James, the wavebox hole should be 60m. The center of the wavebox hole to the water water surface should be 10.5" the box dimension should be Dimensions (L x W x H): 4.9in x 4.4in x 11.8in (125mm x 113mm x 300mm).

Which stream are you talking about?
Turbelle® stream 6105
# For aquariums from 200 to 2,000 litres (52 to 528 USgal.).
# Flow rate: 3,000 to 13,000 l/h (792 to 3,434 USgal./h).
# Energy consumption: max. 45 W.
# Voltage / frequency: 100 â€"œ 240 V / 50 â€"œ 60 Hz.
# Cable length: 5 m (196.8 in.).
# Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50 mm (1.96 in.).
# Magnet Holder up to a glass thickness of 19 mm (.74 in.).

Turbelle® stream 6205
# For aquariums from 800 to 3,000 litres (211 to 792 USgal.).
# Flow rate: 5,000 to 22,000 l/h (1,320 to 5,811 USgal./h).
# Energy consumption: max. 55 W.
# Voltage / frequency: 100 â€"œ 240 V / 50 â€"œ 60 Hz.
# Cable length: 5 m (196.8 in.).
# Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 63 mm (1.96 in.).
# Magnet Holder up to a glass thickness of 25 mm (.98 in.).

Turbelle® stream 6305
# For aquariums > 3,000 litres (792 USgal.).
# Flow rate: 9,000 to 30,000 l/h (2,377 to 7,925 USgal./h).
# Energy consumption: max. 64 W.
# Voltage / frequency: 100 â€"œ 240 V / 50 â€"œ 60 Hz.
# Cable length: 5 m (196.8 in).
# Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 63 mm (2.48 in.).
# Magnet Holder up to a glass thickness of 25 mm (.98 in.).

 

[kamil5000]

Hi All,

The streams are the 'old' model TS24 with multicontroller.

Hope that helps.

Rgrds
kamil