Wavebox Problem

[rawbomb]

My wavebox is not turning on at all, the controller is flashing but the pump is not working. Anyone have this issue before?

 

[rawbomb]

ive cleaned taken the apart the pump and then put it back together but the pump just spins halfway once and then gets stuck going back and forth.

 

[shawnz28]

Is there any visual defects on the impeller or in the impeller housing? You also took out the bearing behind the impeller and cleaned as well correct?

 

[rawbomb]

the impeller and housing look perfect and i completly took it apart and cleaned it, even though it was clean since it was only working less than one week.

 

[rawbomb]

Anyone?

 

[rawbomb]

Anyone know when Ritvko will be back?

 

[rvitko]

I just got back this morning. Try running the pump with no controller, if it works the problem is the controller. If not, it is the pump.

 

[rawbomb]

if the pump is alone it runs fine but after a while of being plugged into the controller the unit stops working.

 

[rawbomb]

i was working fine for approx 2hrs and then stopped. now not even the pump alone works. this started happening after i plugged in the optical sensor but i no longer have used it since i want to have it on all the time.

 

[rvitko]

About how old is the unit? Have you tried opening the pump and checking it out for anything obvious?

 

[rawbomb]

brand new, i just upacked it and used it about 1 week beofre my first post. The pump looks perfect. Ive taken it apart a few times by the book but still nothing.

 

[rvitko]

Is this one with a driver box or with the black junction box? Is the inside of the well that the prop assembly magnet sits in white or black?

 

[rawbomb]

it has a black junction bow and the well is white.

 

[rawbomb]

got it working again but after 1hr or so it stops

 

[rvitko]

Sending a PM