wavebox with streams for 250gallon

[soulfigter]

I have an "odd" shaped tank. I just picked up a tank that is 5 foot long and 30" tall. Looking at it from the front, the left 2 feet of the tank are 36" deep, and then it has a slight bend and tapers down to 24" deep on the right side of the tank. First, will a wavebox work in this tank with the change in depth? I have a wavebox in my 200 rectangle tank, and I love it, so I would like to put one in this tank as well.

Secondly, I have 6100 streams right now, though each with a single controller. I know the wavebox works very well for suspending materials in the water, but I need something to blow the stuff around to get it down my overflow. Would my two 6100s work well for this if I threw one on each end of the tank, or do I need to get some more? Would I want to set them to be more of a just full blast to blow stuff around, or do I want to do a lot of "pulsing" with them, and does this interfere or impede the action created by the wavebox?

Thanks
Jeremy

 

[rvitko]

I don't think the wavebox is a good choice for this tank. I would fear that it may not work for one and because it has more seams it may have a greater tendency to fail from stress.

The 6100's alone would be my choice.