If you go to: http://www.cadlights.com/product_info.php?products_id=89 you will notice that the tank was redone.. and the back area has a light over the whole tank.. is there still room for a tunze nano skimmer?
What skimmer for the C.A.D 25g?
- Thread starter advice1
- Start date
oldreefer76
New member
I have the tunze nano on a 15g and it will fit, but am not sure if the refugium light will give you enough room to remove the collection cup and the remora nano is a hob so don't see it working on it
It all depends on what light they sent you for the refugium. I recieved a coralife light for the refugium and I use a piece of glass to hold it up. Also you should fill the tank a little more then normal to run the Tunze.
I currently have the sapphire skimmer and like it very much, a little noisy though. I am thinking about the Tunze nano skimmer which I heard is excellent.
There should be plenty of room in first chamber. I have a UV light my skimmer and my heater was in the first chamber for a little while. If you do not believe that the Tunze will fit you can always go with the sapphire. Good luck to you
I currently have the sapphire skimmer and like it very much, a little noisy though. I am thinking about the Tunze nano skimmer which I heard is excellent.
There should be plenty of room in first chamber. I have a UV light my skimmer and my heater was in the first chamber for a little while. If you do not believe that the Tunze will fit you can always go with the sapphire. Good luck to you
Kellie in CA
New member
Anyone have any idea why the fuge light goes all the way across now? What is the point?
Waterboy
Premium Member
They sent me two versions of the fuge light - one was T5 and the other was a Coralife PC. The PC fixture was the last one I received. Neither of the fixtures run the length of the tank. The Remora or Remora-nano HOB fits on my 25 when underneath the light. I don't see why it wouldn't fit on the 34.
Similar threads
