JohnV8r
New member
I have a primarily SPS reef tank that is 48"L x 28"W x 30"H for a display tank gross volume of 175 gallons.
I am looking to create a tidal flow by putting two Turbelle Streams in each rear corner and directing it toward the front glass, but at a 30-45 degree angle to create a left to right, and then right to left flow. Run times would be approximately 4 hours each direction and then a switch to the other direction via a Neptune Apex controller.
My question is which Turbelle Stream pumps would be appropriate for this application? Would two 6105's work or do I need two 6155's?
Would I benefit from the wide stream adapter?
Thanks in advance.
I am looking to create a tidal flow by putting two Turbelle Streams in each rear corner and directing it toward the front glass, but at a 30-45 degree angle to create a left to right, and then right to left flow. Run times would be approximately 4 hours each direction and then a switch to the other direction via a Neptune Apex controller.
My question is which Turbelle Stream pumps would be appropriate for this application? Would two 6105's work or do I need two 6155's?
Would I benefit from the wide stream adapter?
Thanks in advance.