Why you should be using the Seneye reef light meter

AQD_ottawa

New member
Why you should be using the Seneye Reef Light Meter​
(Post approved by Premium Aquatics)​

16999226_1252230334855408_6297562922423587381_n.jpg


How much do we all spend on corals in a year? How much do we spend on different supplements to try and make the coral grow and to improve its colour? How much do we spend on making sure the light output we have put these delicate and expensive species under is correct? I think the majority of us are guilty of not spending anything on the last but is without doubt after water quality the most important element in keeping corals successfully.

Until a short time ago working out correct light outputs for corals was based on choosing what we believed to be the right spectrum of bulb for your T5 or MHO, then along came LED's on mass and changed all this, all of a sudden you had multi channel variances to deal with, many reefers have seen their corals succumb to the wrong type of light output, often put under far to higher intensities.

The answer of course is a light meter but these were costly and often confusing to use, this has put off many reefers from purchasing probably the most important piece of equipment you can have along side lights pumps and filters.

This answer came with the launch of the Seneye Reef Aquarium Life support monitor, not only does the Seneye Reef come with a very accurate light meter, it also will monitor your pH, Temperature and Ammonia, as well as your Ammonium level, ideal for seeing if your nutrients are on the rise. The Seneye Reef light meter has stood up against big names such as Apogee and held its ground in terms of accuracy and functionality equally and in some cases reported better.

16938566_1252230384855403_8207516860512111652_n.jpg


When we walk into our fish store and walk out with that new prized coral, would it not be advantageous to know what lighting this specimen is going under? Is it correct for its species? Too hot and the coral will stress and bleach, too cool of intensity and at best it will lose its colour and not grow. Having access to an affordable light meter bridges the gap from failure to success.

Having the ability to balance your tanks lighting, especially LED is now very important to the success of keeping corals, with the Seneye Reefs light meter you no longer are leaving this to chance.

17103610_1252230538188721_7537627800070357652_n.jpg


Even if you have not adopted LED lighting, using the Seneyes light meter to measure the output of your bulbs and tubes is as important, changing bulbs at the right time can both save you money and also help assure better success with coral health. Another great use for the Seneye Reef.

The Seneye Reefs biggest advantages are
"¢ Cost coupled with accuracy, multiple head to heads have shown the Seneye Reef Light meter to be as accurate to names such as Apogee, but costing as little as $199.00
"¢ Ability not only measure PAR but also LUX Kelvin and PUR, the latter PUR is the percentage of useable light (growth light) that is being produced, the higher the number the better growth potential the output has.
"¢ With the addition of the Seneye Web Server (SWS) data logging of all parameters over an internet connection and email alerts and alarms.
"¢ 24/7 warnings of nutrient issues.

For $199 is it worth the risk not knowing the right lighting output for your corals?

Please download the latest catalog here
http://go.seneye.com/catalog

Direct Link to the product
https://premiumaquatics.com/products/seneye-reef-monitoring-system-par-meter.html
 
Last edited:
The fact that the technology to do the sensing is less that £100 to buy... and yet they want £170 just to be able to connect it to the internet through wifi... and then they demand you to pay a further £7 for the Apple app is disgusting and now the reason why I won't be buying.

If you are paying almost £270 for this one would expect the app to be included and to be quite frank, shows the quality of the company producing them. I expect an annual subscription to be implemented at some point and the monthly tabs (if they don't already) will be automatically stopped from sensing after the 30 day lifespan even if they have some life left in them rather than letting you continue to use them if you want. Again forcing you to spend more money buying new sensors when not entirely necessary.
 
No idea what you are talking about, you are very miss informed on all levels of understanding. Sorry.

The App is a free download there is NO charge from Seneye at all.

Seneye Reef monitor unit is $199 only, if you choose to want the option of the web server for email alerts 24 tracking and other options then that's up to you, it's an option not a requirement.

There is absolute no subscription service at all with Seneye. the seneye light meter works even without the water monitoring calibration slides that are available in packs of 3 should you want the water paremeter monitoring features. But for the light meter they are not required.

The slides have to be replaced to make the water parameter monitoring work as it uses colour referencing which is the most accurate method used by all labs so to stay accurate the slide needs replacing, not a pointless excercise as you wish to maintain. Again, the light meter does not use them or need them.

The slides lose accuracy after 30 days and the reason if you want accurate water parameter readings you need to replace it. Not some scam you think, but logical for accuracy. The colour reference simply goes off after this period, why would you want an inaccurate unit?

So as I have said, the light meter does not need the slide so works without it, so no monthly cost there!

In regards to unit cost and a sensor being less than $100 to buy, I would love to see anyone attempt to make a unit like this with all the other options plus developed software, casing FREE Apps and everything else that goes into making a commercially available accurate unit for less than the $199 retail price. I again see no argument in the price of the unit, based on the assessment the sensor alone would cost under $100 before everything else.

I am sorry but not one comment you made is even close to accurate, but I hope my reply has given you the correct info.
 
Last edited:
Back
Top