illjoshlli
New member
I have had a yellow algae that lives in the ‘shadows’ of my tank for 3-6 months now. What is this?
Pics below
It is not like a sheet of algae or hair algae. Any part of the tank that the light hits it does not live… It exists in both low and high flow areas.
My Tank is a 58 gallon up for almost a year now:
250W MH with a decent reflector on 7.5 hours a day.
Circulation by seaswirl on return at 600gph and a MP40 at 60%
Temp 79, ph, 8.1, ALk = 135 (little low), Cal = 450, mg=1350
Nitrate = 0, po4=0(hanna), Ammonia = 0
2 part dosing, Sump with Refugim. No reactors but I do have a skimmer.
I do have some Hair like algae in small areas and some cyno in the refugium so my P04 is probably greater then zero.
I have 5 fish and I feed 1/3 of a cube every night, I rinse half the time. I’ll also throw in pellets once and a while.
I do weekly water changes of 10-15 gallons. I also went through a period of 5 gallon changes every 2 days to try to clear out any potential phosphate problem and it didn’t seem to do anything.
I’m getting good coral growth and everything else looks good (outside of the corals that are getting
“touched’ by my Anemones)
Pics below
It is not like a sheet of algae or hair algae. Any part of the tank that the light hits it does not live… It exists in both low and high flow areas.
My Tank is a 58 gallon up for almost a year now:
250W MH with a decent reflector on 7.5 hours a day.
Circulation by seaswirl on return at 600gph and a MP40 at 60%
Temp 79, ph, 8.1, ALk = 135 (little low), Cal = 450, mg=1350
Nitrate = 0, po4=0(hanna), Ammonia = 0
2 part dosing, Sump with Refugim. No reactors but I do have a skimmer.
I do have some Hair like algae in small areas and some cyno in the refugium so my P04 is probably greater then zero.
I have 5 fish and I feed 1/3 of a cube every night, I rinse half the time. I’ll also throw in pellets once and a while.
I do weekly water changes of 10-15 gallons. I also went through a period of 5 gallon changes every 2 days to try to clear out any potential phosphate problem and it didn’t seem to do anything.
I’m getting good coral growth and everything else looks good (outside of the corals that are getting
“touched’ by my Anemones)