Zoanuts 100g

Zoanut

New member
Thought I'd post up some pics of my tank. The dimensions are 40" length x 24" wide x 20" high. I have about 88lbs of rock in the display and smaller rock pieces in the sump but I'm not sure how much.

The skimmer is a Deltec ap850 overskimming yes but I got it for a good deal second hand so just put it with future upgrades in mind. The return is a Ehiem 1260 which I have T'd off to feed the skimmer as well. The flow apart from the Ehiem 1260 is a Tunze 6105 on a single controller its not turned up to full and there is quite abit of flow in there but am still thinking of getting a Vortech 40w as well or just sell the Tunze and have just the vortech. The lighting is 8 x 39w T5's all on individual reflectors. For the T5's I have 2 x Fiji Purples and 2 x 11k Solarmax and 4 x Actinic Solarmax, the Solarmax tubes came with the lights and I am waiting for my ATI tubes to Arrive along with my Tunze ATO at the end of this month. Thats all for now and time for some pics.

FTS
PICT0021.jpg


Another FTS
PICT0022.jpg


Looking side on
PICT0050.jpg


After 3 days of skimming
PICT0048.jpg
 
Sorry the pics aren't that great and don't really show the colours properly. Also forgot to mention the current config of my light so it goes like this starting from front.

Front
Fiji Purple
Solarmax Actinic
Solarmax 11k
Solarmax Actinic
Fiji Purple
Solarmax Actinic
Solarmax 11k
Solarmax Actinic
Back

The ATI tubes I have ordered are 5 x ATI Blus Plus and 3 x ATI Aquablue Special. I ordered a few extra Blus Plus's to play around with so not sure of the combo I'll use once I get them.
 
Acrylic Here in New Zealand is very expensive if you can find it otherwise I would have made it black.
 
Well since everyone always wants MORE AIR, Id imagine the fine tuning would be done with water levels. Im far from a skimmer expert, though.
 
<a href=showthread.php?s=&postid=15155753#post15155753 target=_blank>Originally posted</a> by BigTuna321
nices zoos !!!

Thanks, I'm getting some more tonight so will take some pics and post them.


<a href=showthread.php?s=&postid=15156363#post15156363 target=_blank>Originally posted</a> by Jflip2002
Weird that the air intake on that skimmer isnt open 100%..... Nice tank.

I haven't opened it full cause I've been told that with Deltecs you only open it to a 2 O'clock direction and then I have adjusted it with the water level. Thanks.
 
Back
Top