Ian
I <3 Corals!
I decided to get out of the saltwater hobby completely,I just can't afford to set this stuff up again with my divorce going on. I was really hoping to hang on to this tank to run as a freshwater tank when I find a place to move into but for the time being I'm going to have to list it. I designed all of this myself for the most efficiency, it's a beautiful set up and someone's going to be very happy with it.
Price for the Tank, Stand, Custom Sump, Plumbing and Return Pump is $1700 FIRM. I'm located in Santa Barbara, CA (I'm adding an American DJ 8 switch power strip and an Eheim glass heater to this package at no extra charge)
First is the tank, the front and left side panes are starfire glass and the rest is regular. It has a black back, right corner triangle overflow, stockman standpipe in the overflow, the return comes through the inside of the overflow and a locline returns the water through a missing tooth in the overflow.
Here's a sketch...
and the actual tank
The stand is welded steel with threads at the bottom for leveling feet that will be included. The stand is 42" tall, is powder coated white and has a nice piece of painted and primed wood under where the sump goes and on top for the tank...
The sump is 40 x 20 x 20 and includes plenty of room for any skimmer, media reactor, kalk/bio pellet reactor and whatever else you want to hang off the side. It also contains the reservoir for the fresh water auto top off. Here's a sketch
Side View
Looking Down
and the finished product
I ordered grey sch40 plumbing to look like sch 80 and I have unions to take most of it apart.
The return pump is a little Tunze Silence 1073.040 and it's nearly new
Here's a pic of everything together
Price for the Tank, Stand, Custom Sump, Plumbing and Return Pump is $1700 FIRM. I'm located in Santa Barbara, CA (I'm adding an American DJ 8 switch power strip and an Eheim glass heater to this package at no extra charge)
First is the tank, the front and left side panes are starfire glass and the rest is regular. It has a black back, right corner triangle overflow, stockman standpipe in the overflow, the return comes through the inside of the overflow and a locline returns the water through a missing tooth in the overflow.
Here's a sketch...
and the actual tank
The stand is welded steel with threads at the bottom for leveling feet that will be included. The stand is 42" tall, is powder coated white and has a nice piece of painted and primed wood under where the sump goes and on top for the tank...
The sump is 40 x 20 x 20 and includes plenty of room for any skimmer, media reactor, kalk/bio pellet reactor and whatever else you want to hang off the side. It also contains the reservoir for the fresh water auto top off. Here's a sketch
Side View
Looking Down
and the finished product
I ordered grey sch40 plumbing to look like sch 80 and I have unions to take most of it apart.
The return pump is a little Tunze Silence 1073.040 and it's nearly new
Here's a pic of everything together
to see, but also 
because of the progress. 
