2020 Aluminum Extrusion Profile

[pga7602]

Too bad they don't make aluminum magnets

Actually, I don't know if I'd skin your tank. Having it open underneath is really awesome. I might brainstorm some other outside the box solution for finishing the structure. Have you considered an apparatus for a removable scaffold or step rail?

A friend of mine was able to use PC-7 Epoxy to get some magnets into the channel. Worked well for him when he was skinning his stand.

 

[pga7602]

I used the 40mm size. I did use there free design consulting as well. Mine light rack it bolted thru the wall and the open end is suspended from the ceiling. it hold 3 Giesemann Aurora fixtures that at 48 inch long. It did sag before the cables were installed because of the weight.

Ahh ok, thats 1515-or 1.50" x 1.50" fractional 15 series square

If it sagged than it's was how the weight is distributed. Would love to see a picture of this setup Richard.

 

[five.five-six]

A friend of mine was able to use PC-7 Epoxy to get some magnets into the channel. Worked well for him when he was skinning his stand.

I'm not sure if these would fit inside the extrusion channels or if they would be strong enough but I was thinking about something like this. we use them in the installation of intrusion alarms on doors and windows that shouldn't drilled for the full size magnets

https://www.magcraft.com/magcraft-n...erTGMEpmplJ8vTODsYSQBonIr1bcn4wBoCL4AQAvD_BwE

 

[five.five-six]

I used the 40mm size. I did use there free design consulting as well. Mine light rack it bolted thru the wall and the open end is suspended from the ceiling. it hold 3 Giesemann Aurora fixtures that at 48 inch long. It did sag before the cables were installed because of the weight.

I was simply amazed with how well that structure did with the amount of unsupported cantilever you had.

 

[wishntoboutside]

Here are some pictures to share . Still waiting on two L brackets to clean up cable wrap.


Sent from my iPhone using Tapatalk

 

[pga7602]

Here are some pictures to share . Still waiting on two L brackets to clean up cable wrap.


Sent from my iPhone using Tapatalk

That's freaking awesome Richard. Great job!

See that's equal to 50 or more G5 on 1515. 2020 would be way overkill.

 

[wishntoboutside]

before the Giesemann fixtures I did have 8 of the Euroquatic Angels on it. Much happier with a Hybrid look.

 

[five.five-six]

That looks awesome. About 10X sexier that the spacers and about 100X more secure.

How did you get up that high? Did Roman have a ladder for you?

Here are some pictures to share . Still waiting on two L brackets to clean up cable wrap.


Sent from my iPhone using Tapatalk

 

[wishntoboutside]

Hello Mark.

I was able to do it with a 10 foot ladder. I do think it is way more secure as well. you will see it soon as I am hosting a poker night around this time next month.