2ed PH probe need help before insane

[redfsh101]

I have just got a second PH probe i have plugged in the card and am trying to calibrate it i have read all the old posts and still have no clue as to how to go about it can some one help i want to use the second PH to control the PH inside the calcium reactor a step by step would be great thanks in advance.

going mad redfish

 

[marinefreak]

Wow, i was just going to post the same thing. I want to control my calcuim reactor but using the 1st PH meter.
But mine needs a little logic as well, i want it to control the ph shutting the the CO2 only when the reactor is running.

 

[AQD_ottawa]

Ok? Can you let me know what part you are not understanding?

Where have you got to so far?

Do you have an PII EX?

What port have you put the card into?

 

[redfsh101]

I am using the Pll ex and the PH card is in the first slot from the right as you look at the front of the unit and not sure what to do next

 

[AQD_ottawa]

So closest to the extra level port and other ports?

if so this port is reserved for Lan and Wlan cards etc so move it to another slot you will then have access to the new pH card

 

[redfsh101]

Wrong slot thank you so much

 

[AQD_ottawa]

common mistake, it is in the manual, admittedly right at the back.