40 gal sps build in mobile alabama

tagraham

New member
hi i have been reef keeping for about 10 years off and on du to me being in the military. well im at my final station and a new house and will not be moving anymore so its time to build a more permanant reef.
current set up is a 22 gal nano that i just upgraded from my jbj 12 that sprung a leak. i took the liberty to add a little bit of my stash of MR. this has been st up for apx 4 weeks now and didnt realy have to much of a cycle in the transiton to the current set up.

the goal,

40 gal breeder sps dominant reef with 20 gal sump

here is the current equipment stock list.
40 gal breeder
20l sump
large unsure of modle number skimmer photo included
50 lbs of marco dry reef rock some already in use
24'' aquatic life t5 ho 4 bulb fixture
vortec mp 10 es
test kist and random crap

ordered stock list
1 Pound (453 Grams) Bulk GFO "Granular" Ferric Oxide
Dual BRS GFO and Carbon Reactor
Danner Mag-Drive Supreme 5 - 500 GPH Water Pump
Aqua Lifter Vacuum Pump (Top Off Pump)
24W - 24IN ATI Purple Plus T5 HO Fluorescent Bulb
24W - 24IN 12000K ATI Aquablue Special T5 HO Fluorescent Bulb
24W - 24IN ATI Blue Plus T5 HO Fluorescent Bulb
ReefKeeper Lite L1 Basic - Digital Aquatics
ReefKeeper SL1 pH and ORP Module - Digital Aquatics
Dual Bracket ReefKeeper Float Switch Kit - Digital Aquatics
BRS Brand pH Probe

need to get list
2x 1.1 mil per min brs dosing pumps
larger light my lfs had the larger version of my current light that will fit just right over the 40 I like t5 ho
pluming stuff and whatever else you guys sugest.

like i said i have several years of experiance but always welcome constructive criticisem. i never clame to know everything. there are alot of things going into this build that i have not listed.

here is the room (under constuction) that the aquarium will go in its the room my wife let me have....
093.jpg


the cabnet and dest that will hold the tank and sump. the middle cabnet will house the sump and GFO/GAC reactor. the one on the right will house dosing pumps and ato resivour and controlers and such.
094.jpg

current and temporary tank. the established rocks i had in my 12 nano for about 3 years the white is the Marco rock that has been in for about 3 weeks and starting to purple up.
016.jpg


sump and skimmer
090.jpg

and some more shots of corals and such
038.jpg

041.jpg


anyway thats the heads up keep the input and coments coming and be patient the build will start in the next few weeks. i have a fantastic LFS here and nothing but patience in this hobby....well i know i should anyway.
i will post some equipment pics when it gets here and some progress on the room. when that is done the full build will begin.
 
Update going with a 29 display. It's at my LFS getting drilled. The room is finished and all the parts are in. I'll be setting up my sump and the control bored sometime this week I'll post pics later.
 
Last edited:
Looks great, can't wait to see more pics once it's all set up. What made you decide on going with a 29 instead of the 40 breeder?
 
Well the future purchase of a single led pendant was the biggest reason. I wait an ai sol or the radion. If I went withe the 40 I would need 2
 
That's a great reason. These LED fixtures are expensive! I've been looking at having a tank custom built and think I need to plan the dimensions around the light I want rather than vice versa.
 
Ya I took the single most costly item and based it on that. For now I'll run my 4 t5s on the tank and just keep everything closer to the center of the tank.
 
Ordered my new light. Suntek supply 6 bulb 36" t5 ho with hanging kit. Bulb combo suggestions? I like it more blue than white but I need good par for sps growth so let me know what y'all think
 
i know its slow but im still waiting on the tank to get finished and a few more things to come in. also i forgot to order some ph probe calibration fluid is this really nessisary or what and does anyone local have any i can use?
 
Back
Top