600 Gallons System - i2ik's Journal
- Thread starter i2ik
- Start date
i2ik
New member
250G - AO just recently was able to start producing PPG 3/4" starfire. It was no bigger than 1/2" before as you mentionned. For more details, maybe someone from AO could tell you more 
I was a lucky one. At first it was going to be low iron glass, but Will told me that he could now get a 3/4" starfire glass for my tank so i could not refuse
Ginzo - Thanks! My cube is going Zeovit very soon About the tank, we will see in a couple of years 
Tank is supposed to arrive at 17:30, i will be posting for sure when i got the chance!
I was a lucky one. At first it was going to be low iron glass, but Will told me that he could now get a 3/4" starfire glass for my tank so i could not refuse Ginzo - Thanks! My cube is going Zeovit very soon
About the tank, we will see in a couple of years Tank is supposed to arrive at 17:30, i will be posting for sure when i got the chance!
DARKPHREAK
New member
Looking forward to seeing your build Richard!
i2ik
New member
The tank finally arrived!!!!
The tank finally arrived!!!!
What a hard day! got to make appointment for delivery and the guys arrived one hour before so we started to put down the tank into the driveway. No need to say, it was damn heavy with 5 of us to just push it. So then, waited until the guys come and it was really hard but we finally make it safe. I will check the tank tomorrow if there is any problem with it, but up to now, i havent seen any problem and will probably wont have any too. I have to say that i am really impressed of how it build! Everything is well done, the silicone, the polish glasses and the most impressive is my starfire glass! Its absolutely beautiful!!! I also got some of my component Check this out :
Oh yeah, here in montreal, it was quite cold and our fingers are about to fall off even with gloves and all
The truck in front of the house
The tank finally arrived!!!!
What a hard day! got to make appointment for delivery and the guys arrived one hour before so we started to put down the tank into the driveway. No need to say, it was damn heavy with 5 of us to just push it. So then, waited until the guys come and it was really hard but we finally make it safe. I will check the tank tomorrow if there is any problem with it, but up to now, i havent seen any problem and will probably wont have any too. I have to say that i am really impressed of how it build! Everything is well done, the silicone, the polish glasses and the most impressive is my starfire glass! Its absolutely beautiful!!! I also got some of my component
Check this out :Oh yeah, here in montreal, it was quite cold and our fingers are about to fall off even with gloves and all
The truck in front of the house
i2ik
New member
My good friends that came to help me out! Most of us are right in the middle of our midterms session so i am very grateful for them to help me out today! We were 12 peoples but even with 12 peoples, going up the stairs and trying to fit it in the door was not an easy job, especially in this weather.
Here's some of my components!What you see:
-2x Sfiligoi Infinity XR4
-2x ACLS Unit
-1x Return pump Sequence Dart
-2x Wavy Sea Plus
-1x Vortech pump
-1x Icecap Battery back up
-1x Schuran Jetstream 2 with Media
-1x 5500ml of Fauna Marin Ultra Mag 5500ml
-1x Finnex 800W Titanium Heater
Still missing 1xSfiligoi Infinity XR4 with ACLS unit, one Finnex 800W
I will be also getting more stuff to come soon.
The Schuran Jetstream 2 Ca reactor. This reactor is build like a tank, very impressed with the quality of the material.
Simply Sexy!
i2ik
New member
The Sfiligoi package is very well done! could not be better.
I wont unwrap it until the light rack is done but the reflector and pendant is very nice!!! I dont even need to fire it, i know i wont regret this buy
the top of the pendant! I was looking to see this on other's setup but could not find. Here what it looks like for those interested in seeing it.
Here's the tank in place. Still a lot of fingerprints on it, have not got the time to clean it, also got some snow in it since it was snowing a bit here in Montreal.
What is coming?
My sump and reservoir.
i2ik
New member
Thanks Ginzo!
Since i cant do DIY, i had no choice of buying my stuff. I think its better to buy something that you wont have to change later on, must as well get what you think is the best
I did not win the lottery, going to school and learn stock market a bit which is part of the program... Since i am still with my parents until my studies are done, it helps a lot not having lots of responsabilities such as house, family and all.
Since i cant do DIY, i had no choice of buying my stuff. I think its better to buy something that you wont have to change later on, must as well get what you think is the best
I did not win the lottery, going to school and learn stock market a bit which is part of the program...
Since i am still with my parents until my studies are done, it helps a lot not having lots of responsabilities such as house, family and all.
invincible569
New member
Very nice choice on equipment and setup. I bet you are excited!! Im excited for you.
Oh.. i have to send you those pics of the Schuran 2.
Im excited for you. Oh.. i have to send you those pics of the Schuran 2.
hawaiianwargod
Active member
That's gonna be awesome tank. Equipments alone are all topnotch!!!
invincible569
New member
<a href=showthread.php?s=&postid=9317544#post9317544 target=_blank>Originally posted</a> by i2ik
Hey Edward, Thank you! Hell yeah, i am excited!
For the schuran 2, somehow i got the instruction in my boxes so i dont think i will have trouble connecting it, if so, i will contact you for that
Sounds good. Why dont you fill the tank with water and do a test leak for now?
hawaiianwargod
Active member
Any updates? ^^^
hawaiianwargod
Active member
Thanks Richard. What is the size of your overflow drains....1.5"? and your returns?
Similar threads
