6101 Pump Placement

[cayenne]

I am putting two 6101's on a 7095 controller in a 48" long, 30" tall, 140 gallon tank.

Any suggestions on the best placement of the two 6101's in the tank? I was thinking opposite rear corners facing the front center.

 

[shawnz28]

Sounds about what I would do. I would end up with them about 2/3 - 3/4 to the back on the side glass angled towards the front of the tank so it would hit the opposite sides front glass

 

[cayenne]

<a href=showthread.php?s=&postid=13064387#post13064387 target=_blank>Originally posted</a> by shawnz28
Sounds about what I would do. I would end up with them about 2/3 - 3/4 to the back on the side glass angled towards the front of the tank so it would hit the opposite sides front glass

So if I am understanding correctly, instead of aiming both at the center, aim each at an opposite far corner?

 

[shawnz28]

Yeah towards the front glass still but more of a shot across the tank. Really there is no "perfect" way takes a little trial and error