6208 Wave box

[sseaner]

What do I need to do to mount the 6208 on 3/4" glass?

Thanks,

Scott

 

[aleithol]

I think this thread may help which includes Roger's answer. His answer is related to my 1/2" glass, but you'll see he says in the 2nd post the same magnets will work on 3/4".

 

[sseaner]

where can I purchase a pair of 6025.501?

Thanks,

Scott

 

[aleithol]

where can I purchase a pair of 6025.501?

Thanks,

Scott

A Google search for 6025.501 just gave me several places (mostly in Europe), but included Amazon here in the US with Prime Shipping if you're a member. There are other online sites specializing in aquarium gear like Premium Aquatics and others that also allow you to purchase Tunze parts like this, so a bit of searching will help you. The ones I've dealt with tend to take your order and money, then within a day or two flip it over to let Roger and his folks (I'm assuming he can't be in all those places doing everything every minute -- but maybe so!) in Houston drop ship them to you quickly after that.

 

[rvitko]

Amazon, Premium and Marine Depot will generally have these in stock. The 6025.500 is 2 6025.501 as a pair, this would be the better buy than 2 6025.501 (cheaper).

 

[cali9dub]

Is there a way to hook up 2 6208 wave boxes with just one 7092 controller ?

 

[rvitko]

Yes, but it will only work if they are in the same tank. If you haven't purchased yet the 6215 would do the same job and be less expensive and simpler than 2 6208. You would use the second cable if they are on the same side and leave everything as it is otherwise. If one is on each side, you need to first open the controller and set the jumper to inverse so they are opposite in timing.

 

[cali9dub]

They will be in the same tank on opposite sides. However, they will be on each side of a center overflow. One will be facing to the right and the other to the left....both facing the sides of the tank. Will they still need opposite timing with this set up?

 

[cali9dub]

Basically like this.....
Back
Left |<---|||||||--->| Right
Front

Arrows indicate flow from the wave boxes.

 

[cali9dub]

Sorry....I have 2 6206 models with the 7092 controller....will that make any difference ?

 

[rvitko]

Yes, they will need inverse timing, the same applies to the 6206's.

 

[cali9dub]

Ok. Thanks Roger. I'll give it a shot.