6260.10 disassembly and cleaning question

[LilRobb]

Hi Roger (or any other Tunze specialist)

I couldn't find my answer in your FAQs, my apologies if that was already covered.

I just bought a (used) wavebox and trying to make it work, the driver gives an audible alarm every time the pump comes on.
So I disassembled and cleaned the pump, please see the picture below for any removable parts:



I could be mistaken - but I think if I understand the FAQs correctly there should be another bearing at the end?

I can't tell whether or not it is baked into the motor, is there any way of telling whether it is mounted already or missing?

If it is missing, can you let me know the part number so I can reorder one?

Thanks in advance,

Robb

 

[shawnz28]

There is a bearing behind the impeller in the well. There is a hole in it you can use to pull it out with a small pick, a long screw, or a phillips screwdriver on angle. You should be able to see it in there unless there is a ton of calcium build up.

I know this is a older multipiece impeller but it is the second piece on the left of this picture. The oring will be visible upon removal as it is behind the bearing.

 

[rvitko]

As Shawn said, these parts may be stuck at the bottom of the pump, please check.

 

[LilRobb]

10-4 all checked and cleaned - works like a charm!

Thanks for the input guys!