90greefman
New member
Anything obvious i am missing here? I would imagine just push the nightmode button and when the lights go out the pumps slow down. Unfortunately that doesnt happen. Thoughts?
Thanks
Andrew
Thanks
Andrew
7095 nightmode not working
- Thread starter 90greefman
- Start date
90greefman
New member
And yes there is a photocell i have placed in the aquarium lighting area.
The pumps don't necessarily slow down.
The pump stop pulsing and go to whatever is set for the bottom speed knob on that channel. If night mode is on, when the photocell encounters darkness, instead of the pump pulsing from speed 1 to speed 2 as it normally would, it stays at speed 2.
The pump stop pulsing and go to whatever is set for the bottom speed knob on that channel. If night mode is on, when the photocell encounters darkness, instead of the pump pulsing from speed 1 to speed 2 as it normally would, it stays at speed 2.
90greefman
New member
Ahhhhh.......so I completely missed that. Will check that out. Thank you
90greefman
New member
And it works just as you described. Thanks
