CrazyEyes
New member
This is basically a turn key setup. Just add water and salt. I am NOT parting out, please don't even ask.
Tank
- 75g Deep blue w/black acrylic coast2coast over w/bean animal drain.
- 3/4" white starboard (siliconed to the bottom but can cover with sand)
- x3 1" slip x slip bulkheads and x1 3/4" slip x thread bulkhead
Stand
Custom stand skinned with birch and oak. Stained black and cleared with minway polyclear. Enough space underneath for a large sump.
Skimmer
- i-TECH (this is one of the i-TECHs that John did not build, although John has tweaked it a bit and it still skims great.
Powerheads
- x2 Jebao wp-25s
Return pump
- Jebao DC6000, only about 2 months of use.
Light
- This is a DIY LED build using top notch componants
- x28 Exotic hyper violets (430nm)
- x4 Bridglelux Vero 10 90CRI 5k neutral whites
- x8 Luxeon K 8up 450nm royal blues
- x8 Rebel ES limes
- Typhon control with StevesLED acrylic enclosure
- x7 Meanwell LDD-H drivers
- 250w 48v 5.2a dc power supply
- x2 Coolermaster 60mm fans
- Custom enclosure for light
Misc
- BRS dual reactor w/cobalt MJ1200
-Vertex 1.5L reactor w/ unopened 500ML bag of BioSpheres NP biopellets.
-Also includes all plumbing. Plumbing from the drains are all 1" PVC with true union ball valves and unions. Return plumbing is 3/4" with unions and true union ball valves. Also a manifold with 3 exits to run the BRS reactor and Vertex reactor plus an extra.
-3/4" conduit hanging brackets for light (will need a hanging kit)
Tank also will come with 40-45lbs of BRS reef saver rock.
Lights at 1%
This is an old pic of the old tank but wanted to show off the sump area.
Again, another old pic, stand has been redone since this pic but I wanted to show the manifold setup.
The wood on the stand has since been stained blacked and cleared just like the rest of the stand. It's 3/4" furniture grade oak.
Asking $1,300 OBO. I'm also sure I'm forgetting a few things. PM me or text Mike @ 727 three 0 three 41 forty five
Tank
- 75g Deep blue w/black acrylic coast2coast over w/bean animal drain.
- 3/4" white starboard (siliconed to the bottom but can cover with sand)
- x3 1" slip x slip bulkheads and x1 3/4" slip x thread bulkhead
Stand
Custom stand skinned with birch and oak. Stained black and cleared with minway polyclear. Enough space underneath for a large sump.
Skimmer
- i-TECH (this is one of the i-TECHs that John did not build, although John has tweaked it a bit and it still skims great.
Powerheads
- x2 Jebao wp-25s
Return pump
- Jebao DC6000, only about 2 months of use.
Light
- This is a DIY LED build using top notch componants
- x28 Exotic hyper violets (430nm)
- x4 Bridglelux Vero 10 90CRI 5k neutral whites
- x8 Luxeon K 8up 450nm royal blues
- x8 Rebel ES limes
- Typhon control with StevesLED acrylic enclosure
- x7 Meanwell LDD-H drivers
- 250w 48v 5.2a dc power supply
- x2 Coolermaster 60mm fans
- Custom enclosure for light
Misc
- BRS dual reactor w/cobalt MJ1200
-Vertex 1.5L reactor w/ unopened 500ML bag of BioSpheres NP biopellets.
-Also includes all plumbing. Plumbing from the drains are all 1" PVC with true union ball valves and unions. Return plumbing is 3/4" with unions and true union ball valves. Also a manifold with 3 exits to run the BRS reactor and Vertex reactor plus an extra.
-3/4" conduit hanging brackets for light (will need a hanging kit)
Tank also will come with 40-45lbs of BRS reef saver rock.
Lights at 1%
This is an old pic of the old tank but wanted to show off the sump area.
Again, another old pic, stand has been redone since this pic but I wanted to show the manifold setup.
The wood on the stand has since been stained blacked and cleared just like the rest of the stand. It's 3/4" furniture grade oak.
Asking $1,300 OBO. I'm also sure I'm forgetting a few things. PM me or text Mike @ 727 three 0 three 41 forty five
Last edited:
glws
PM me and let me know if you need anything!
