875G / 1335G - Bio-Filter setup

[mushkind]

fantastic. This is going to be a great tank once it's fully stocked.

thanks!

captured a nice picture today while massstick feeding

Joel

 

[CrayolaViolence]

I love your rock scape. Lovely!

 

[OurCoralReef]

thanks!

captured a nice picture today while massstick feeding

Joel

The food stuck on the wall is called massstick?

 

[mushkind]

The food stuck on the wall is called massstick?

easy reefs masstick.


Joel

 

[OurCoralReef]

easy reefs masstick.


Joel

Thanks do you like it

 

[vikinglord13]

does your copperband butterfly eat the masstick or do you have to feed it clams?

 

[mushkind]

does your copperband butterfly eat the masstick or do you have to feed it clams?

hey! all the fish except my pipefish eat from masstick and seem to love it. i also like the option to add vitamines or fresh garlic to the masstick while preparing it.
will upload a video from butterfly eating from it soon.

best regards

Joel

 

[mushkind]

copperband while eating masstick

https://youtu.be/mfE6iEcOREE

Joel

 

[worm5406]

<iframe width="853" height="480" src="https://www.youtube.com/embed/mfE6iEcOREE?rel=0" frameborder="0" allowfullscreen></iframe>

 

[vikinglord13]

Nice, that's good news for Copperband fans!

 

[lukewithcats]

very jealous of your setup. Gorgeous fish!

 

[mushkind]

but maybe my copperband is just a bit special when it comes to eating he also likes chickita banana [emoji4]

https://vimeo.com/198328460

Joel

 

[mushkind]

yesterday one of my 3 returns stopped working [emoji33] still have around 2.2 m^3 flow per hour wich is okay for the moment. little dissapointed by aquabee. will get a spare return for such cases.

continued with hanging devices over the sump.
proper wiring will follow [emoji6]

also played a bit around with a 3d printer

really like the tool openScad where i can write/code complex models.

probe holder for example

frag rack

some close ups

Joel

 

[worm5406]

Just wondering.

The material the 3D printing is made out of. Is it safe to be in the tank?

Phosphates and all?

 

[mushkind]

Just wondering.

The material the 3D printing is made out of. Is it safe to be in the tank?

Phosphates and all?

hi!
its made out of pla there are some discussions on the internet, but as the probeholder is not in the water and get wet very rare it is no problem. pla would dissolve only after a very long time in saltwater.

alkalinity is at 8.4 dkh

po4 is at 0.00 somedays or after feeding at 0.01

nitrate is at 8

just replaced the 3rd return pump back at 33000l or 8700gal flow per hour (we switched the controller with a spare from my dealer, pump was fine only electronical issue)

Joel

 

[mushkind]

some small updates

a livestream is going on now for testing purpose (local dealer wants a camera integration for his showtanks)

https://youtu.be/ZxyTmvVPDy0

regards


Joel

 

[tajaba]

looks beautiful!

 

[mushkind]

https://youtu.be/uB1jxQydaRs

short video update

Sent from my Gemini using Tapatalk