Southern Boy
New member
Hello, I've never been on this forum but someone turned me on to it to get a little more local exposer.I don't mind meeting somone if they are interested.I live in Ft.Pierce about 45 minutes North of Palm Beach.
I've got 2 250 watt HH retro kits that are 7-8 months old with 14K bulbs by Hamilton tech,1 2x96 watt PC ballast with 2 96 watt actinic 03's (420 nm) bulbs.The bulbs are about 3 months old, 1 2x65 watt PC ballast with clips and reflectors.Both PC set-ups have the rubberized end caps with long cords.I have the clips for the 96"'s but no stock reflectors.I also have a 20 strip of blue moonlights. I would like to sell this as a full set.400.00 for everything.This is a great system for a decent sized tank.Do to the weight and fraglness of the bulbs I don't really want to ship.If I break it up I might ship certain items.
I got a mag 24 that is 3-4 months old.In great shape.It's got a little coraline on it but other than that it's mint.I'd like 90.00 for a local pickup or 105.00 shipped.
I got a 70 gallon total capacity refugium/sump up for grabs.It has a total volume capacity of 70.2 gallons.It has an operating capicity of 57.6 gallons(top of the baffle sections).The dimensions are 48" long 19.5" tall,and 18" deep.The large section in the middle is 28.5" long by 16" deep.The intake section(drain section is 5" wide and the section(that I had LR rubble in is 3" wide.The drains come in there and under 1 divider and up through the 3" section to dump into the main section.After the main section there is another 4" section before it goes to the return section that is 6" wide.The drain section has a divider that seperates off into 2 sections.The return section used to as well but I removed that divider.The sections could be flipped around and a protien skimmer that had a foot print of 6" or less could be put there along with the drains.Then a pump could be put in the other end for the return.The only changes I would make to this if I were to use it again would be that I would rout some slits into the divider that seperated the the drain section from the fuge section.The water flows right over top of the main section and does not offer much flow to the fuge.I had to run a small power head to keep flow in the fuge,where a couple slits would pffer flow in the fuge without using a powerhead.I would like for this to be a localized pick up.Do to it's size and weight it will be expensive to ship.I will get a weight on it if someone is willing to pay the shipping cost.If someone wants it shipped I will do paypal only.300.00 is the price.
I've got 2 250 watt HH retro kits that are 7-8 months old with 14K bulbs by Hamilton tech,1 2x96 watt PC ballast with 2 96 watt actinic 03's (420 nm) bulbs.The bulbs are about 3 months old, 1 2x65 watt PC ballast with clips and reflectors.Both PC set-ups have the rubberized end caps with long cords.I have the clips for the 96"'s but no stock reflectors.I also have a 20 strip of blue moonlights. I would like to sell this as a full set.400.00 for everything.This is a great system for a decent sized tank.Do to the weight and fraglness of the bulbs I don't really want to ship.If I break it up I might ship certain items.
I got a mag 24 that is 3-4 months old.In great shape.It's got a little coraline on it but other than that it's mint.I'd like 90.00 for a local pickup or 105.00 shipped.
I got a 70 gallon total capacity refugium/sump up for grabs.It has a total volume capacity of 70.2 gallons.It has an operating capicity of 57.6 gallons(top of the baffle sections).The dimensions are 48" long 19.5" tall,and 18" deep.The large section in the middle is 28.5" long by 16" deep.The intake section(drain section is 5" wide and the section(that I had LR rubble in is 3" wide.The drains come in there and under 1 divider and up through the 3" section to dump into the main section.After the main section there is another 4" section before it goes to the return section that is 6" wide.The drain section has a divider that seperates off into 2 sections.The return section used to as well but I removed that divider.The sections could be flipped around and a protien skimmer that had a foot print of 6" or less could be put there along with the drains.Then a pump could be put in the other end for the return.The only changes I would make to this if I were to use it again would be that I would rout some slits into the divider that seperated the the drain section from the fuge section.The water flows right over top of the main section and does not offer much flow to the fuge.I had to run a small power head to keep flow in the fuge,where a couple slits would pffer flow in the fuge without using a powerhead.I would like for this to be a localized pick up.Do to it's size and weight it will be expensive to ship.I will get a weight on it if someone is willing to pay the shipping cost.If someone wants it shipped I will do paypal only.300.00 is the price.
