Adding an additional GHL-Profilux 6 Socket Digital Switchable Plugbar:confused:??????

[cabinetmaker]

I am a new user of the GHL profilux about 2 months.:bounce2: I have the GHL Profilux Plus II eX controller and I just purchased an additional GHL-Profilux 6 Socket Digital Switchable Plugbar to add to the Profilux 6 Socket Digital Switchable Plugbar that I already have or even just to add it. I am extremely confused as to how to make the two Plugbars work together the instructions just are not clear enough to me to attempt to make the connection.

I need a little help,

Thanks, Ken

 

[AQD_ottawa]

Hiya

What you need to do is program the second power bar to tell it what sockets it will be.

In your case as it will be the second power bar in the chain it will be socket 7-12

Please follow this sequence

1. Unplug "first" digital power bar from S1S4
2. Plug in power bar to be programmed directly into S1S4 on profiLux
3. make sure power is applied (AC) to the power bar
4. Go to socket outlet function in profiLux control
5. Go to "program digital power bar tab" at bottom right of screen
6. Follow all instructions
7. Once programmed, unplug newly programmed power bar from S1S4 and plug the lead into the second western socket on the first power bar.
8. Now plug first power bar data cable into S1S4

Job done, now you have sockets 1-12

 

[cabinetmaker]

You should rewrite the book. Thank you so much I was confused but your steps made this very very simple. Knowing that this site is available, I will not hesitate to upgrade.

Ken

 

[AQD_ottawa]

Hiya

You will find even more helpful advise on the dedicated GHL developers support forum, this is where all support is taken care of

www.aquariumcomputer.com/forum

 

[cabinetmaker]

Thanks

Ken