adding another chamber to RODI

[chucklez]

I currently have a 4 part BRS RODI system. Standard sediment, chloramine, RO then DI set up. My incoming TDS is a monstrous 675+. Obviously I burn through sediment filters. Usually change one out every 100-150 gallons of RODI. This way I can stretch my resin out to 400 or so gallons. Anyways, I have an extra BRS canister and was originally planning on adding an extra sediment filter, but looking at standard BRS set ups it tends to be 1 sediment and 2 carbon blocks.

So should I run that route, or due to my incoming tds go ahead and add that extra sediment? Our water supplier also adds Chloramines.

 

[bhbell]

TDS stands for total DISOLVED solids. A sediment filter will not help. Carbon can help pull them out of your supply but, sediment filters, not so much.

Sent from my VK815 using Tapatalk