analog / digital power bar question

[zoomin]

Just getting started with Profilux setup.

I have one digital power bar plugged into S1-S4 and one analog powerbar plugged into S5-S8.

The analog bar seems to just mirror the settings of the digital bar; i.e. the analog bar's sockets switch on and under exactly the same conditions as the digital bar's first 4 sockets.

I read this thread here but my number does not automatically change, and changing the numbering of the digital bar manually to start at S5 does not help either.

I am using v4.01 firmware and PC software.

Any advice appreciated.

 

[kidney514]

Did you check the Digital Powerbar in the bottom of the socket dialog?

 

[zoomin]

<a href=showthread.php?s=&postid=12823138#post12823138 target=_blank>Originally posted</a> by kidney514
Did you check the Digital Powerbar in the bottom of the socket dialog?

Yes I did.

 

[chadfarmer]

starts as S5 renumber your ports in the software

 

[zoomin]

<a href=showthread.php?s=&postid=12823831#post12823831 target=_blank>Originally posted</a> by chadfarmer
starts as S5 renumber your ports in the software

I've tried that (I think).

click on program digital powerbar - set the first port to 5 and the rest change accordingly.

Then, it should be that the analog one starts as S12, but it doesn't seem to.

 

[AQD_ottawa]

Analogue 5-8 digital 9 to 14

 

[Matthias Gross]

standard powerbars connected on S5-S8 are always the sockets 5-8 -> can't be changed

program start number of digital powerbar to 9

test the reaction of all sockets using the manual override

 

[zoomin]

<a href=showthread.php?s=&postid=12824638#post12824638 target=_blank>Originally posted</a> by AQD_ottawa
Analogue 5-8 digital 9 to 14

Thanks - that works.

 

[H20ENG]

So in using both one analog and one digital powerbar, I must only use sockets 5- 14???? I tried this and it does finally work, but it sure is not intuitive or easy to understand

Wow, this took me hours of searching and fiddling. Grr.

 

[AQD_ottawa]

Page 55 of the manual

Just email if you get stuck thats what im here for, well partly anyway

 

[H20ENG]

Silly me for looking at "2.3: Connecting switchable powerbar"

I'll get this licked yet :lol:
Thanks